U.I. Lapp PRODUCT INFORMATION GmbH H05V-K 29.11.2013 European <HAR> cable type certification Cables <HAR>marking also stands for the international endorsement of national certification institutes testing marks and certificates, e. g. <VDE><HAR>. The <HAR>marking is of special importance in case of goods traffic between European countries. Info <HAR> Application range Internal wiring of devices Protected installation in and on lighting equipments Signal systems in and on plaster in tubes Design Fine-wired copper conductor of bare copper strands in line with conductor class 5 acc. IEC 60228 Core insulation: Based on PVC Norm references / Approvals <HAR> cable type certification acc. EN 50525-2-31 Product features Flame-retardant according IEC 60332-1-2 Spool: d1 = 18 mm d2 = 200 mm b = 85 mm Remark Unless specified otherwise, the shown product values are nominal values. Detailed values (e.g. tolerances) are available upon request. Copper price basis: EUR 150/100kg. Refer to catalogue appendix T17 for the definition and calculation of copper-related surcharges. Photographs are not to scale and do not represent detailed images of the respective products. The outer diameters stated in the part number table are maximum values. Technical Data Classification: ETIM 5.0 Class-ID: EC000993 ETIM 5.0 Class-Description: Single core cable Conductor stranding: Fine-wired copper conductor of bare copper strands in line with conductor class 5 acc. IEC 60228 Minimum bending radius: At a cable temperature of 20C 10C, according to HD 516 4 x outer diameter (OD) for normal use 2 x OD for cautions bending Nominal voltage: U/U: 300/500 V Test voltage: 2000 V Current rating: VDE 0298 Part 4 HD 516/VDE 0298-300 Temperature range: Fixed installation: -30C to +80C Moved: +5C to +70C Product Management Document: LAPP PRO168EN.pdf 1 / 5 PN 0486/0 03. 0 2012 Lapp Group - Technical changes reserved Photographs are not to scale and do not represent detailed images of the respective products.U.I. Lapp PRODUCT INFORMATION GmbH H05V-K 29.11.2013 Product Management Document: LAPP PRO168EN.pdf 2 / 5 PN 0486/0 03. 0 2012 Lapp Group - Technical changes reserved Photographs are not to scale and do not represent detailed images of the respective products. Powered by TCPDF (www.tcpdf.org) Part number Conductor cross- Outer diameter (mm) Core colour m/ring m/spool Copper index (kg/km) Weight (kg/km) section (mm) 4510001 0,5 2.5 green/yellow 100 4.8 9 4510011 0,5 2.5 black 100 4.8 9 4510021 0,5 2.5 blue 100 4.8 9 4510141 0,5 2.5 Dark blue 100 4.8 9 4510031 0,5 2.5 brown 100 4.8 9 4510111 0,5 2.5 yellow 100 4.8 9 4510121 0,5 2.5 green 100 4.8 9 4510071 0,5 2.5 violet 100 4.8 9 4510081 0,5 2.5 pink 100 4.8 9 4510091 0,5 2.5 orange 100 4.8 9 4510041 0,5 2.5 red 100 4.8 9 4510051 0,5 2.5 white 100 4.8 9 4510061 0,5 2.5 grey 100 4.8 9 4510161 0,5 2.5 ultra-marine blue 100 4.8 9 4510921 0,5 2.5 Dark blue/white 100 4.8 9 4510002 0,75 2.7 green/yellow 100 7.2 12 4510012 0,75 2.7 black 100 7.2 12 4510022 0,75 2.7 blue 100 7.2 12 4510142 0,75 2.7 Dark blue 100 7.2 12 4510032 0,75 2.7 brown 100 7.2 12 4510112 0,75 2.7 yellow 100 7.2 12 4510122 0,75 2.7 green 100 7.2 12 4510072 0,75 2.7 violet 100 7.2 12 4510082 0,75 2.7 pink 100 7.2 12 4510092 0,75 2.7 orange 100 7.2 12 4510042 0,75 2.7 red 100 7.2 12 4510052 0,75 2.7 white 100 7.2 12 4510062 0,75 2.7 grey 100 7.2 12 4510922 0,75 2.7 Dark blue/white 100 7.2 12 4510003 1 2.8 green/yellow 100 9.6 15 4510013 1 2.8 black 100 9.6 15 4510023 1 2.8 blue 100 9.6 15 4510143 1 2.8 Dark blue 100 9.6 15 4510033 1 2.8 brown 100 9.6 15