4520111 Lapp Kabel

U.I. Lapp DATA SHEET GmbH H07V-K (X07V-K) DB 4520001EN (does not affect the separate, VDE approved H05V-K product) valid from: 16.10.2015 Application H07V-K (X07V-K) are single-conductor cables with thermoplastic PVC-insulation for installation inside of closed conduits and cable ducting systems and on or under plaster as well as in similar closed systems. They are suitable for protected, stationary use in or on lighting installation or control units/ switchgear in conjunction with voltages up to 1000 V AC or 750 V DC to-ground Under individual part numbers, different core insulation colours and package types are offered for diverse application types. More and more automatic harnessing machines are made use of by the manufacturing sector for the harnessing of such hook-up wires. Especially therefor, we offer parts with embossed cable marking instead of printing and which are delivered inside big one-way cardboard boxes with enhanced cable amount per box. Further standard package types are classic coils with standard order length as well as spools with winded, fix standard length of this wire. Package types Coils: Seven-digit part without final, alphabetic character Plastic spool (up to max. 2,5 mm): Eight-digit part with final letter S on the eighth place Small version of big one-way cardboard box: Eight-digit part with final letter K on the eighth place Big version of big one-way cardboard box: Eight-digit part with final letter E on the eighth place Design acc. to EN 50525-2-31 (VDE 0285-525-2-31) Conductor fine wire strands of bare copper, acc. to IEC 60228 resp. EN 60228 (VDE 0295), Class 5 Core insulation PVC compound type TI 1 acc. to EN 50363-3 (VDE 0207-363-3) Electrical properties Nominal voltage U /U 450 / 750 V 0 Test voltage 2500 V AC Mechanical and thermal properties Minimum bending radius at intended use: AD 8 mm: 4 x outer diameter 8 mm < AD 12 mm: 5 x outer diameter 12 mm < AD: 6 x outer diameter at cautious bending: AD 8 mm: 2 x outer diameter 8 mm < AD 12 mm: 3 x outer diameter 12 mm < AD: 4 x outer diameter Temperature range Fixed installation (without vibration): -40 C to +80 C Moved operation: +5 C to +70 C Laying/ handling: Min. +5 C Short-circuit and ground leakage: Max. +160 C Ambient temperature at storage: Max. +40 C Max. conductor temperature: +70 C Flammability acc. to IEC 60332-1-2 resp. EN 60332-1-2 (VDE 0482-332-1-2) Tests acc. to EN 60811-100 (VDE 0473-811-100) EN 50395 (VDE 0481-395) EN 50396 (VDE 0473-396) The cable is characterized with the HAR HAR-sign or HAR-identification thread. EU-Directives These cables are conform to the EU-Directives 2014/35/EU (Low Voltage Directive), and 2011/65/EU (RoHS, Restriction of the use of certain hazardous substances). Originator: ERBO1 / PCM document: DB4520001EN page 1 of 1 approved: HAPF / PDC All rights reserved acc. to DIN ISO 16016. PD 0019/2.2 11.10EN X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for lapp kabel manufacturer: Other Similar products are found below : 00008779 0026122 0026156 0026124 0026127 0026253 70002624 70002708 70002728 EPIC KIT H-A 10 BS TBF-LB M20 EPIC KIT H- A 3 BS AGS EPIC KIT H-BE 16 BS AG EPIC KIT LS1 A1 3+PE+4 K 22260044 22260046 22260134 22260986 22262020 22262022 22262023 22262027 21700623 22260045 22260122 22260651 52005949 52005990 52006010 52006030 52006107 52006133 52006153 52006173 52006650 52103115 52103165 52115750 53015600 53015610 53015620 53015650 53015810 53016610 53016830 53111640 53111700 53111710 53111730 54000040 54001620