EL-MOTE-DTC Dual Channel Thermocouple Probe Cloud-Connected Temperature Data Logger Measures temperature between 0 to +200C / +32 to +392F using the standard K-type probe provided. Other thermocouple probes can also be used Records and uploads temperature data to the EasyLog Cloud Access live temperature data via any Internet Browser or the EasyLog Cloud App Set up alarm options for temperature zone breaches email alerts, beeper alarms or LED flash alerts Baertt y life of up to 2 years The EL-MOTE-DTC has been designed to monitor temperature in a large range of applications, using two standard K-type probes on two 1.5m cables. Ideal for monitoring locations perhaps difficult or inhospitable to the data log ger itself, the EL-MOTE-DTC is ideal for monitoring environments where a wide temperature range is required. Other thermocouple probes can be used with the EL-MOTE-DTC for applications requiring temperature readings outside of those covered by the supplied probe (see specification table for details). Products in the EL-MOTE range are simple to set-up and easy to use. Download the EasyLog Cloud App and set-up a device in minutes over your WiFi network. After set-up, the device can be placed any where within range of the WiFi network, continually monitoring and recording your data to the EasyLog Cloud. Access your data on any Internet Browser or the EasyLog Cloud App, enabling you to monitor the temperature of your chosen location from any where at any time. EL-MOTE devices can be programmed with high and low temperature alarm zones. If a temperature zone is breached, an alarm will be activated. Alarm options include: email alerts (which can be sent to one or multiple email addresses), beeper sound alarms, and LED flash alerts. EL-MOTE devices can be powered using the supplied baeriestt or a mains adapter (sold separately), and are provided with a wall mountable bracket for installation. With EasyLogs brand new range of smart probe enabled data loggers, such as the EL-MOTE-DTC, there is no need to take your product out of action and send it away for re-calibration for what can often be weeks. When it comes time to re-calibrate your data logger, simply order a new pre-calibrated smart probe, which you can immediately swap in for your old one. www.lascarelectronics.com/data-loggers Issue 2 02/2019 Page 1 of 2EL-MOTE-DTC Dual Channel Thermocouple Probe Cloud-Connected Temperature Data Logger Log ger Specification Minimum Typical Maximum Unit Baertt y Life 2* years Baertt y Type 4 x 1.5V AA cells Operating Temperature (Powered by Baeries Supplied)tt -18 (-0.4) +55 (+131) C (F) Operating Temperature (Mains Adapter Powered) -20 (-4) +60 (+140) C (F) 1 (0 to 200) C (range) Accuracy (excl. supplied probe) (2 (32 to 392)) (F (range)) Resolution 0.1 (0.2) C (F) Logging Period (User Configurable) 10 sec 10 min 12 hrs Transmission Period (User Configurable) 1 min 1 hour 24 hours Dimensions 93 x 93 x 32 (3.7 x 3.7 x 1.3) mm (inches) IP Rating 67 K Type Probe Specification (EL-P-TC-K provided) Minimum Typical Maximum Unit Range 0 to +200C (+32 to +392F) C (F) Accuracy 2.5 (4.5) C (F) Probe Length 100 (3.9) mm (inches) Cable length 1500 (59.1) mm (inches) Other Compatible Probe Specifications Minimum Typical Maximum Unit K Type Measurement Range -200 to +1,300 (-328 to +2,372) C (F) J Type Measurement Range -200 to +1,190 (-328 to +2,174) C (F) T Type Measurement Range -200 to +390 (-328 to +734) C (F) The sensor is IEEE 802.11bgn (2.4GHz) compliant, supports WEP, WPA/WPA2 encr yption and enterprise networks (PEAP, T TLS, FAST). 211-140401 CONTAINS FCC ID: YOPGS2011MIZ * Baertt y life is dependent on: transmis sion period, WiFi encr yption method, WiFi encr yption key rotation frequency (determined by the router/access point), signal strength between router/access point and WiFi device, presence, volume and type of WiFi traffic from other devices, sample rate and operating temperature. Log ging period and transmission period can be configured in Settings via the EasyLog Cloud App. WHATS IN THE BOX WHAT EXTRA ACCESSORIES ARE AVAILABLE PART NUMBER DESCRIPTION PART NUMBER DESCRIPTION EL-MOTE WALL BRACKET Wall Mounting Bracket for EL-MOTE Device EL-MOTE-PSU Mains Power Adapter BATTERIES 1.5V AA x 4 K type thermocouple probe - 1.5m cable EL-SP-TC (EL-P-TC-K) and smart probe adapter 2 x K type thermocouple probe - 1.5m cable 2 x EL-SP-TC (EL-P-TC-K) and smart probe adapter EL-MOTE WALL BRACKET Wall Mounting Bracket for EL-MOTE Device Specifications liable to change without prior warning CALIBRATION CERTIFICATES NOW AVAILABLE EasyLog offers a Traceable Calibration Certificate Ser vice on Temperature Data Log gers using reference equipment which has been calibrated by a UKAS/NIST/HKAS or CNAS accredited laboratory and using apparatus traceable to national or international standards. For more information please see www.lascarelectronics/calibration Issue 2 02/2019 Page 2 of 2