The Leading Source for EMI Shielding Reliable Board, Enclosure and Cable Solutions Reflective Shield PCB shielded enclosures with RF absorbers Shielded enclosures for RF radiations from PCB components stop RF energy right at the source, eliminating re-radiation and interference with Reflective Shield other nearby components as well as reducing the number of other Reflective Shield shielding expenditures such as filters, gaskets and RF hardening of the equipment exterior structure. Typical shielding approach allows reflected radiation to affect neighboring components. The addition of a frequency-tuned absorber membrane layer adds unprecedented performance, assimilating radiated energy without relying RF Absorber Shield on repeated reflections from the interior surfaces of the shield, and without problems of harmonic resonance. Refer to sketches at right. RF Absorber Shield RF Absorber Shield modular fence and cover design RF absorber approach assimilates The versatile shield design includes a solderable fence and tight-fitting radiated frequencies and converts to cover assembly of copper alloy 770 (C77000), a tough solder-compatible imperceptible heat energy. Specific material which does not require plating nor has corrosion prone bare frequency-tuned absorber material is RF Absorber Shield edges. The removable cover provides convenient access to circuitry and bonded to the lid interior. A wide range of EMC and Microwave absorbers can be is very cost-effective due to the use of universal multi-use manufacturing specified from 40 MHz up to 116 GHz. tooling. RF Absorber Shield RF Absorber Shield custom tuning to the exact frequency RF Absorber Shield Each enclosure shield size can be combined with frequency-specific absorber material bonded to the cover interior for exacting remediation of otherwise errant frequency emanations - a selection of five EMC absorbers effective from 50 MHz to 1 GHz along with an extra wideband RF Absorber ShieldRF Absorber Shield version effective from 40 MHz to 5 GHz and, ten Microwave versions PCB Shield efRF Absorber Shieldfectiveness can be further effective up to 116 GHz. enhanced by adding RF absorber material under PCB (see pages 30-34). RF Absorber Shield RF Absorber Shield absorber membrane specifications Adhesive Mount Option RF absorber membrane partially detached EMC standard series 50MHz to 1GHz from lid for exhibit purpose only. Five frequency-specific formulations. Adhesive Mount Option Material Characteristic Measure Adhesive Mount Option Frequency range 50 MHz - 1 GHz Peak frequency choices 100, 300, 400, 500 or 800 MHz Temperature range -20C to 100C Flammability rating UL94-V0 Adhesive: temperature 0F to 180F -18C to 83C ASTM D-3575 tack 8.4 p.s.i. (stainless steel) ASTM D-3575 shear 300+ hrs. 2 p.s.i. 22C ASTM D-3575 Dimensions: standard 15.75 W x 15.75 L x .011 max. 400,0 x 400,0 x 0,28 maximum 3-0 W x 65-0 L x .011 max 1,0 x 20,0 M x 0,28 EMC extra wideband series 40MHz TO5GHz 3.2GHz PEAK. This all-around universal wideband formula is available in a standard temperature type and a high temperature type (up to 200C). Excellent performance from 40MHz to 5GHz (PS3200EMC series, opposite page). pin mount Material Characteristic Measure Frequency range 40 MHz - 5 GHz Peak frequency 3.2 GHz Temperature range -20C to 100C and -10C to 200C (high temp) Flammability rating UL94-V0 Adhesive: standard temp. 0F to 180F -18C to 83C ASTM D-3575 high temp. 50F to 312F 10C to 200C ASTM D-3575 tack 8.4 p.s.i. (stainless steel standard) ASTM D-3575 8.3 p.s.i. (stainless steel high temperature) ASTM D-3575 shear 300+ hrs. 2 p.s.i. 22C ASTM D-3575 Dimensions: standard 8.25 W x 15.75 L x .004 max. 210,0 x 400,0 x 0,10 maximum 3-0 W x 65-0 L x .004 max 1,0 x 20,0 M x 0,10 14100 McCormick Drive Tampa, FL 33626 866.TECH.EMI (866.832.4364) T: 813.855.6921 F: 813.855.3291 www.leadertechinc.com The Leading Source for EMI Shielding Reliable Board, Enclosure and Cable Solutions Microwave series: up to 116 GHz The MA series is a high frequency microwave noise absorber in a range of formulations addressing 2.0GHz to 116GHz radiations from electronic components. Material Characteristic Measure Frequency range 2.0 MHz - 116.0 GHz adhesive mount Peak frequency choices 2.4, 5.8, 10, 18, 24, 26, 38, 60, 76, 110 GHz Temperature range -20C to 110C Flammability rating UL94-V0 Adhesive: temperature 0F to 180F -18C to 83C ASTM D-3575 tack 8.4 p.s.i. (stainless steel) ASTM D-3575 shear 300+ hrs. 2 p.s.i. 22C ASTM D-3575 Dimensions: standard 7.875 W x 15.75 L x .138 max.200,0 x 400,0 x 3,5 maximum 3-0 W x 65-0 L x .138 max 1,0 x 20,0 M x 3,5 B EMC type PCB shield enclosures A THROUGH-HOLE OR ADHESIVE MOUNT UP TO 5GHz. The EMC series is available in three standard sizes each can be combined with an absorber layer bonded to the inside of the lid in seven choices including the 3200 extra wideband absorber with effective characteristics from 40 MHz Internal Absorber Layer through 5 GHz, which is also available in a high temperature version. Board to C Refer to page 28 for absorber material characteristics, and page 29 for Absorber D typical absorption rates by frequency. pin length E .040 (1,02mm) For recommended Mounting Hole Patterns, visit our web site at Through-hole mount recommended hole size .050 (1,27mm) Surface mount pins formed w/ 90 outward bend, www.ferrishield.com under PCB Shield Enclosures and click on link PCB add SM suffix to the part Mounting Hole Patterns. Adhesive mount option provides quick Adhesive mount no holes required installation, easy retrofit. PART No. Adhesive Mount A B C D E Frequency Range Peak Frequency Attenuation PS100EMC24 PS100EMC24A 1.00 25,4 2.00 50,8 .198 5,0 .100 2,5 .500 12,7 50 MHz to 1 GHz 100 MHz -17.3 dB PS300EMC24 PS300EMC24A 1.00 25,4 2.00 50,8 .198 5,0 .100 2,5 .500 12,7 50 MHz to 1 GHz 300 MHz -17.6 dB PS400EMC24 PS400EMC24A 1.00 25,4 2.00 50,8 .198 5,0 .100 2,5 .500 12,7 50 MHz to 1 GHz 400 MHz -17.2 dB PS500EMC24 PS500EMC24A 1.00 25,4 2.00 50,8 .189 4,8 .100 2,5 .500 12,7 50 MHz to 1 GHz 500 MHz -17.8 dB PS800EMC24 PS800EMC24A 1.00 25,4 2.00 50,8 .192 4,9 .100 2,5 .500 12,7 50 MHz to 1 GHz 800 MHz -17.9 dB PS3200EMC24 PS3200EMC24A 1.00 25,4 2.00 50,8 .196 5,0 .100 2,5 .500 12,7 40 MHz to 5 GHz 3.2 GHz -31.3 dB PS3200EMC24H* PS3200EMC24HA* 1.00 25,4 2.00 50,8 .196 5,0 .100 2,5 .500 12,7 40 MHz to 5 GHz 3.2 GHz -31.3 dB PSEMC24 PSEMC24A (w/o absorber) 1.00 25,4 2.00 50,8 .200 5,1 .100 2,5 .500 12,7 50 MHz to 1 GHz 100 MHz -5.3 dB PS100EMC44 PS100EMC44A 2.00 50,8 3.00 76,2 .398 10,1 .120 3,0 .500 12,7 50 MHz to 1 GHz 100 MHz -17.3 dB PS300EMC44 PS300EMC44A 2.00 50,8 3.00 76,2 .398 10,1 .120 3,0 .500 12,7 50 MHz to 1 GHz 300 MHz -17.6 dB PS400EMC44 PS400EMC44A 2.00 50,8 3.00 76,2 .398 10,1 .120 3,0 .500 12,7 50 MHz to 1 GHz 400 MHz -17.2 dB PS500EMC44 PS500EMC44A 2.00 50,8 3.00 76,2 .389 9,9 .120 3,0 .500 12,7 50 MHz to 1 GHz 500 MHz -17.8 dB PS800EMC44 PS800EMC44A 2.00 50,8 3.00 76,2 .392 10,0 .120 3,0 .500 12,7 50 MHz to 1 GHz 800 MHz -17.9 dB PS3200EMC44 PS3200EMC44A 2.00 50,8 3.00 76,2 .396 10,1 .120 3,0 .500 12,7 40 MHz to 5 GHz 3.2 GHz -31.3 dB PS3200EMC44H* PS3200EMC44HA* 2.00 50,8 3.00 76,2 .396 10,1 .120 3,0 .500 12,7 40 MHz to 5 GHz 3.2 GHz -31.3 dB PSEMC44 PSEMC44A (w/o absorber) 2.00 50,8 3.00 76,2 .400 10,2 .120 3,0 .500 12,7 50 MHz to 1 GHz 100 MHz -5.3 dB PS100EMC59 PS100EMC59A 3.00 76,2 4.50 114,3 .498 12,6 .120 3,0 .250 6,4 50 MHz to 1 GHz 100 MHz -17.3 dB PS300EMC59 PS300EMC59A 3.00 76,2 4.50 114,3 .498 12,6 .120 3,0 .250 6,4 50 MHz to 1 GHz 300 MHz -17.6 dB PS400EMC59 PS400EMC59A 3.00 76,2 4.50 114,3 .498 12,6 .120 3,0 .250 6,4 50 MHz to 1 GHz 400 MHz -17.2 dB PS500EMC59 PS500EMC59A 3.00 76,2 4.50 114,3 .489 12,4 .120 3,0 .250 6,4 50 MHz to 1 GHz 500 MHz -17.8 dB PS800EMC59 PS800EMC59A 3.00 76,2 4.50 114,3 .492 12,5 .120 3,0 .250 6,4 50 MHz to 1 GHz 800 MHz -17.9 dB PS3200EMC59 PS3200EMC59A 3.00 76,2 4.50 114,3 .496 12,6 .120 3,0 .250 6,4 40 MHz to 5 GHz 3.2 GHz -31.3 dB PS3200EMC59H* PS3200EMC59HA* 3.00 76,2 4.50 114,3 .496 12,6 .120 3,0 .250 6,4 40 MHz to 5 GHz 3.2 GHz -31.3 dB PSEMC59 PSEMC59A (w/o absorber) 3.00 76,2 4.50 114,3 .500 12,7 .120 3,0 .250 6,4 50 MHz to 1 GHz 100 MHz -5.3 dB *NOTE: H variations of these PS3200EMC types are the high temperature version 14100 McCormick Drive Tampa, FL 33626 866.TECH.EMI (866.832.4364) T: 813.855.6921 F: 813.855.3291 www.leadertechinc.com