Aluminum Electrolytic Capacitors
REA
REA Series
Features
85 , 2,000 ~ 3,000 hours assured
Standard series for general purposes
RoHS Compliance
Sleeve & Marking Color: Blue & Black
Specifications
Performance
Items
Category Temperature Range -40 ~ +85
Capacitance Tolerance 20% (at 120Hz, 20)
Rated voltage
100V 100V
Time
Leakage Current (at 20) after 2 minutes after 5 minutes
CV 1,000
I = 0.01CV or 3 (A) CV 1,000
Leakage Current
whichever is greater I = 0.03CV + 15(A) I = 0.02CV + 25(A)
Where, C = rated capacitance in F V = rated DC working voltage in V
Rated Voltage 6.3 10 16 25 35 50 63 100 160 200 250 350 400 450
Tan (at 120 Hz, 20)
Tan (max) 0.23 0.20 0.16 0.14 0.12 0.10 0.09 0.08 0.12 0.14 0.17 0.20 0.25 0.25
When the capacitance exceeds 1,000F, 0.02 shall be added every 1,000 F increase.
Impedance ratio shall not exceed the values given in the table below.
Rated Voltage 6.3 10 16 25 35 50 63 100 160 200 250 350 400 450
D16
Low Temperature Z(-25) 6 4 33222 2
3 6 8 12 14 16
Impedance D16
Characteristics (at 120Hz) /Z(+20) 8 6 44333 3
Ratio D16
Z(-40) 10 8 66433 3
4 8 10 16 18 20
/Z(+20) D16
18 16 12 10 8 8 6 6
2,000 Hrs for D 8mm
Test Time
3,000 Hrs for D 10mm
Capacitance Change With in 20% of initial value
Endurance Tan Less than 200% of specified value
Leakage Current Within specified value
* The above Specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage applied with rated
ripple current for 2,000 / 3,000 hours at 85.
Test Time 1,000 Hrs
Capacitance Change With in 20% of initial value
Shelf Life Test Tan Less than 200% of specified value
Leakage Current Within specified value
* The above Specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at
85 without voltage applied. The rated voltage shall be applied to the capacitors before the measurements for 160 ~ 450V
(Refer to JIS C 5101-4 4.1).
Freq. (Hz)
60 (50) 120 500 1k 10k up
Ripple Current & Cap. (F)
Frequency Multipliers Under 100 0.70 1.00 1.30 1.40 1.50
100C1,000 0.75 1.00 1.20 1.30 1.35
1,000 up above 0.80 1.00 1.10 1.12 1.15
Diagram of Dimensions
Vent6.3
L+ max D+max
Lead Spacing and Diameter Unit: mm
D 5 6.3 8 10 12.5 16 18 22 25
P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10 12.5
d0.5 0.6 0.8 1.0
L<20: 1.5, L20: 2.0
2.0
15 min 4 min
Sleeve
0.5
The case size of 12.516, 1616, 1620, 1816, 1820 and 1825 are suitable for below diagram:
Vent L+ max D+max
15 min 4 min
Sleeve
78
All product specifications in the catalog are subject to change without notice. (CAT. 2014E2)
d
d
P0.5
P0.5