Aluminum Electrolytic Capacitors REA REA Series Features 85 , 2,000 ~ 3,000 hours assured Standard series for general purposes RoHS Compliance Sleeve & Marking Color: Blue & Black Specifications Performance Items Category Temperature Range -40 ~ +85 Capacitance Tolerance 20% (at 120Hz, 20) Rated voltage 100V 100V Time Leakage Current (at 20) after 2 minutes after 5 minutes CV 1,000 I = 0.01CV or 3 (A) CV 1,000 Leakage Current whichever is greater I = 0.03CV + 15(A) I = 0.02CV + 25(A) Where, C = rated capacitance in F V = rated DC working voltage in V Rated Voltage 6.3 10 16 25 35 50 63 100 160 200 250 350 400 450 Tan (at 120 Hz, 20) Tan (max) 0.23 0.20 0.16 0.14 0.12 0.10 0.09 0.08 0.12 0.14 0.17 0.20 0.25 0.25 When the capacitance exceeds 1,000F, 0.02 shall be added every 1,000 F increase. Impedance ratio shall not exceed the values given in the table below. Rated Voltage 6.3 10 16 25 35 50 63 100 160 200 250 350 400 450 D16 Low Temperature Z(-25) 6 4 33222 2 3 6 8 12 14 16 Impedance D16 Characteristics (at 120Hz) /Z(+20) 8 6 44333 3 Ratio D16 Z(-40) 10 8 66433 3 4 8 10 16 18 20 /Z(+20) D16 18 16 12 10 8 8 6 6 2,000 Hrs for D 8mm Test Time 3,000 Hrs for D 10mm Capacitance Change With in 20% of initial value Endurance Tan Less than 200% of specified value Leakage Current Within specified value * The above Specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage applied with rated ripple current for 2,000 / 3,000 hours at 85. Test Time 1,000 Hrs Capacitance Change With in 20% of initial value Shelf Life Test Tan Less than 200% of specified value Leakage Current Within specified value * The above Specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 85 without voltage applied. The rated voltage shall be applied to the capacitors before the measurements for 160 ~ 450V (Refer to JIS C 5101-4 4.1). Freq. (Hz) 60 (50) 120 500 1k 10k up Ripple Current & Cap. (F) Frequency Multipliers Under 100 0.70 1.00 1.30 1.40 1.50 100C1,000 0.75 1.00 1.20 1.30 1.35 1,000 up above 0.80 1.00 1.10 1.12 1.15 Diagram of Dimensions Vent6.3 L+ max D+max Lead Spacing and Diameter Unit: mm D 5 6.3 8 10 12.5 16 18 22 25 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10 12.5 d0.5 0.6 0.8 1.0 L<20: 1.5, L20: 2.0 2.0 15 min 4 min Sleeve 0.5 The case size of 12.516, 1616, 1620, 1816, 1820 and 1825 are suitable for below diagram: Vent L+ max D+max 15 min 4 min Sleeve 78 All product specifications in the catalog are subject to change without notice. (CAT. 2014E2) d d P0.5 P0.5