Aluminum Electrolytic Capacitors
REA
REA Series
Features
85 , 2,000 ~ 3,000 hours assured
Standard series for general purposes
RoHS Compliance
Sleeve & Marking Color: Blue & Black
Specifications
Performance
Items
Category Temperature Range -40 ~ +85
Capacitance Tolerance 20% (at 120Hz, 20)
Rated voltage
100V 100V
Time
Leakage Current (at 20) after 2 minutes after 5 minutes
CV 1,000
I = 0.01CV or 3 (A) CV 1,000
Leakage Current
whichever is greater I = 0.03CV + 15(A) I = 0.02CV + 25(A)
Where, C = rated capacitance in F V = rated DC working voltage in V
Rated Voltage 6.3 10 16 25 35 50 63 100 160 200 250 350 400 450
Tan (at 120 Hz, 20)
Tan (max) 0.23 0.20 0.16 0.14 0.12 0.10 0.09 0.08 0.12 0.14 0.17 0.20 0.25 0.25
When the capacitance exceeds 1,000F, 0.02 shall be added every 1,000 F increase.
Impedance ratio shall not exceed the values given in the table below.
Rated Voltage 6.3 10 16 25 35 50 63 100 160 200 250 350 400 450
D16
Low Temperature Z(-25) 6 4 33222 2
3 6 8 12 14 16
Impedance D16
Characteristics (at 120Hz) /Z(+20) 8 6 44333 3
Ratio D16
Z(-40) 10 8 66433 3
4 8 10 16 18 20
/Z(+20) D16
18 16 12 10 8 8 6 6
Test Time 2,000 Hrs (3,000 Hrs for D10mm)
Capacitance Change With in 20% of initial value
Endurance Tan Less than 200% of specified value
Leakage Current Within specified value
* The above Specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage applied with rated
ripple current for 2,000 / 3,000 hours at 85.
Test Time 1,000 Hrs
Capacitance Change With in 20% of initial value
Shelf Life Test Tan Less than 200% of specified value
Leakage Current Within specified value
* The above Specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at
85 without voltage applied. The rated voltage shall be applied to the capacitors before the measurements for 160 ~ 450V
(Refer to JIS C 5101-4 4.1).
Freq. (Hz)
60 (50) 120 500 1k 10k up
Ripple Current & Cap. (F)
Frequency Multipliers Under 100 0.70 1.00 1.30 1.40 1.50
100C1,000 0.75 1.00 1.20 1.30 1.35
1,000 up above 0.80 1.00 1.10 1.12 1.15
Diagram of Dimensions
Vent6.3
L+ max
D+max Lead Spacing and Diameter Unit: mm
D 5 6.3 8 10 12.5 16 18 22 25
P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10 12.5
d0.5 0.6 0.8 1.0
L<20: 1.5, L20: 2.0 2.0
15 min 4 min
Sleeve
0.5
The case size of 12.516, 1616, 1620, 1816, 1820 and 1825 are suitable for below diagram:
L+ max
Vent D+max
15 min 4 min
Sleeve
73
All product specifications in the catalog are subject to change without notice. (CAT. 2013E1)
d
d
P0.5
P0.5Aluminum Electrolytic Capacitors
REA
Dimension: D L(mm)
Dimension & Permissible Ripple Current Ripple Current: mA/rms at 120 Hz, 85
V. DC
6.3V (0J) 10V (1A) 16V (1C) 25V (1E) 35V (1V) 50V (1H) 63V (1J) 100V (2A)
DL mA DL mA DL mA DL mA DL mA DL mA DL mA DL mA
F Contents
2.2 2R2 511 29 511 33
3.3 3R3 511 35 511 40
4.7 4R7 511 42 511 48
10 100 511 65 511 70 511 59
6.311 115
22 220 511 95 6.311 115
811.5 135
6.311 136
33 330 511 108 6.311 140 811.5 145
511 125
47 470 511 115 511 1306.311165 6.311 170 1012.5235
811.5 245
100 101 511 1606.3111906.311210811.5260 1016 325
1012.5 320
12.520 640
220 221 511 220 6.311 260 811.5320 811.5 3851012.5455 1016 490
1616 625
1020 710 1620 695
330 331 6.311 290 6.311 290 811.54401012.5490 1016 585
12.516 675 1816 685
1020 755 1616 910
470 471 6.311 350 811.5 4401012.5545 1016 740 1625 910
12.516 610 12.520 900
1012.5 650 1020 955 12.520 1,145 12.525 1,340
1,000 102 811.5 540 1012.5 635 1620 1,260 1840 1,820
811.5 550 12.516 830 1616 1,010 1620 1,160
1020 1,070 12.516 930 12.525 1,540
2,200 222 1016 845 1620 1,390 1635.5 1,960 1831.5 2,040
12.516 970 1616 1,160 1616 1,150
1020 1,185 12.520 1,450 1631.5 2,070
3,300 332 12.520 1,420 1620 1,490 1835.5 2,500 1840 2,575
12.516 960 1616 1,240 1825 1,970
12.525 1,780 1620 1,600 1625 2,100
4,700 472 12.520 1,545 1835.52,70022403,040
1616 1,420 1816 1,820 1825 2,170
1620 1,700 1625 2,280 1635.5 2,475
6,800 682 12.525 1,880 22402,90022453,185
1820 1,870 1820 1,890 1831.5 2,550
1620 2,000 1625 2,150 1831.5 2,590
10,000 103 18403,08022453,400
1820 2,020 1825 2,370 1635.5 2,450
1631.5 2,460 1640 2,730 2245 3,780
15,000 153 1840 3,100
1825 2,375 1831.5 2,620 2540 3,850
22,000 223 1831.5 2,780 1840 3,370 2240 3,90025454,290
33,000 333 2240 3,700
V. DC
160V (2C) 200V (2D) 250V (2E) 350V (2V) 400V (2G) 450V (2W)
Contents DL mA DL mA DL mA DL mA DL mA DL mA
F
1 010 511 18 511 18 511 22 6.311 25
2.2 2R2 511 29 6.311 33 6.311 33 6.311 33 811.5 45
3.3 3R3 6.311 46 6.311 46 811.5 50 811.5 50 1012.5 65
811.5 55 811.5 55
4.7 4R7 6.311 50 811.5 55 811.5 60
1012.5 80 1012.5 80
10 100 811.5 75 811.5 81 1012.5 100 1016 110 1016 110 1020 140
22 220 1012.5 130 1012.5 135 1016 150 12.516 185 12.520 200 12.525 300
1020 215 12.520 245
33 330 1016 175 1016 180 1616 260 1620 270
12.516 220 1616 260
1020 230 1020 240 1620 340
47 470 12.520 290 1620 340 1631.5 390
12.516 250 12.516 250 1816 310
12.520 330 1625 420
68 680 12.520 330 12.525 370 1631.5 435 1635.5 460
1616 370 1820 410
1620 460 1631.5 540 1640 560
100 101 12.525 440 1625 510 1835.5 570
1816 450 1825 520 1835.5 570
1625 620 1631.5 625
150 151 1625 620 1835.5 640 1840 670 2245 800
1820 605 1825 630
1631.5 790 1640 840 2245 960
220 221 1635.5 830 2240 920 2545 1,030
1825 760 1835.5 890 2540 980
330 331 1835.5 985 1840 1,150 2240 1,200 2545 1,270
470 471 1840 1,150 22401,400 2245 1,470
Part Numbering System
Gas Pb-free and PET
REA series 470 F 20% 16V Bulk Package
811.5L
Type coating case
REA 471 M 1C BK - 0811
Lead
Capacitance Rated Rubber Lead Wire and
Series Capacitance Configuration Case Size
Tolerance Voltage Type Coating Type
& Package
Note: For more details, please refer to Part Numbering System (Radial Type) on page 10.
74
All product specifications in the catalog are subject to change without notice. (CAT. 2013E1)