Aluminum Electrolytic Capacitors RUK RUK Series Features 125, 3,000 ~ 5,000 hours assured For automobile modules and other high temperature applications RoHS Compliance Sleeve & Marking Color: Black & White Specifications Items Performance Category Temperature Range -40 ~ +125 Capacitance Tolerance 20 (at 120Hz, 20) I = 0.01CV or 3 (A) whichever is greater (after 2 minutes) Leakage Current (at 20) Where, C = rated capacitance in F V = rated DC working voltage in V Rated Voltage 10 16 25 35 50 63 Tan (at 120 Hz, 20) Tan (max) 0.15 0.12 0.10 0.10 0.08 0.08 Impedance ratio shall not exceed the values given in the table below. Low Temperature Rated Voltage 10 16 25 35 50 63 Characteristics (at 120Hz) Impedance 3 2 2 2 2 2 Z(-25) / Z(+20) Ratio Z(-40) / Z(+20) 6 4 4 4 4 4 3,000 Hrs for D 8mm Test Time 5,000 Hrs for D 10mm Endurance Capacitance Change With in 20% of initial value Tan Less than 200% of specified value Leakage Current Within specified value * The above Specifications shall be satisfied when the capacitors are restored to 20 after applied with rated subjected to DC voltage with the rated ripple current is applied for 3,000 / 5,000 hours at 125. Test Time 1,000 Hrs Capacitance Change With in 20% of initial value Shelf Life Test Tan Less than 200% of specified value Leakage Current Less than 500% of specified value * The above Specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 125 without voltage applied. Freq.(Hz) 120 1k 10k 100k up Cap.( F) 0.47 ~ 100 1.00 1.70 1.88 2.00 Ripple Current & Frequency Multipliers 150 ~ 470 1.00 1.45 1.58 1.65 1,000 1.00 1.20 1.25 1.33 Diagram of Dimensions Lead Spacing and Diameter Unit: mm Vent8 L+ max D+max D 8 10 12.5 16 P 3.5 5.0 5.0 7.5 d0.6 0.8 2.0 0.5 15 min 4 min PET Sleeve The case size of 1620 is suitable for below diagram: Vent L+ max D+max 15 min 4 min PET Sleeve 84 All product specifications in the catalog are subject to change without notice. (CAT. 2014E1) d d P0.5 P0.5Aluminum Electrolytic Capacitors RUK Dimension: D L(mm) Dimension & Permissible Ripple Current Ripple Current: mA/rms at 120 Hz, 125C V. DC 10V (1A) 16V (1C) 25V (1E) 35V (1V) 50V (1H) 63V (1J) F Contents DL mA DL mA DL mA DL mA DL mA DL mA 10 100 811.556 811.556 22 220 811.575 1012.5 99 1012.5 99 33 330 811.5 92 1012.5108 1016 133 1016 133 47 470 1016 159 1020 173 811.5100 1012.5 1291016142 100 101 1012.5 154 1016 190 1016 208 1020 225 220 221 1016 252 1020 305 12.520 371 12.525 403 12.520 279 12.520 279 330 331 1016 308 12.520 414 12.525 493 1620 503 470 471 1020 399 12.525 537 1620 601 1620459 1,000 102 1620 715 Part Numbering System Pb-free and PET RUK series 470 F 20% 16V Bulk PackageGas Type 12.525L coating case RUK 471 M 1C BK - 1325 Capacitance Rated Lead Configuration Rubber Lead Wire and Series Capacitance Case Size Tolerance Voltage & Package Type Coating Type Note: For more details, please refer to Part Numbering System (Radial Type) on page 10. 85 All product specifications in the catalog are subject to change without notice. (CAT. 2014E1)