AC Current transducer AK-C- I = 10 .. 200 A PN Transducer for the electronic measurement of AC sinusoidal waveforms, with galvanic isolation between the primary (High power) and the secondary circuits (Electronic circuit). Jumper selectable ranges and self powered transducers. Electrical data 1) Primary Nominal Current Analogue Output Signal Type RoHS Features Date code I (A.t.RMS) V (V DC) PN OUT AC sinusodal measurement 10,20,50 5 AK 50 C5 planned Average responding 10,20,50 10 AK 50 C10 MAY 2006 Self powered transducers 100,150,200 5 AK 200 C5 planned Panel mounting 100,150,200 10 AK 200 C10 JUNE 2006 Voltage output Jumper selectable ranges Vc Supply voltage Self Powered R Load resistance 1 M L Advantages V Rated voltage (CAT III, PD2) 150 V AC b V RMS Isolation voltage test, 50 Hz, 1mn 3 kV AC d Large aperture f Frequency bandwith 50-60 Hz High isolation between primary and secondary circuits Accuracy - Dynamic performance data Easy to mount X Accuracy I T =25C 1 % PN, A Applications t Response time 90% of I < 100 mS r PN Automation systems Analog current reading for remote monitoring (e.g. motor). General data Data loggers Self-powered transducer does not T Ambient operating temperature (0-95% RH) - 20 ..+ 50 C A drain data logger batteries. T Ambient storage temperature - 20 ..+ 85 C S Panel meters m Mass 120 g Simple connection displays power Safety IEC 61010-1 consumption. EMC EN 61326 Options on request 1) : For 0-5 V output model, no saturation output up to 8.2 V Note and for 0-10 V output model, no saturation output up to 15 V. DIN mounting 060816/6 LEM reserves the right to carry out modifications on its transducers, in order to improve them, without previous notice. Page 1/2 LEM www.lem.comDimensions AK-C- (unit : mm, 1mm = 0.0394 inch) 61.0 19 23.5 23.7 88.9 4.5 39 78 Mechanical characteristics Remark General tolerance 1 mm Temperature of the primary conductor should not Primary aperture 19 mm exceed 60C. Panel mounting 2 holes 4.5mm Distance between holes 78 mm Connections 2 x UNC8 Cylindric Head 060816/6 Page 2/2 LEM reserves the right to carry out modifications on its transducers, in order to improve them, without previous notice. LEM www.lem.com 3.2 24.5 55.4 15 49