Data Sheet GE TM 6A Analog PicoDLynx : Non-Isolated DC-DC Power Modules 3Vdc 14.4Vdc input 0.6Vdc to 5.5Vdc output 6A Output Current Features Compliant to RoHS II EU Directive 2011/65/EU Compatible in a Pb-free or SnPb reflow environment (Z versions) Compliant to IPC-9592 (September 2008), Category 2, Class II DOSA based Wide Input voltage range (3Vdc-14.4Vdc). Ref. to Figure 41 for corresponding output range. Output voltage programmable from 0.6Vdc to 5.5Vdc via RoHS Compliant external resistor TM Tunable Loop to optimize dynamic output voltage response Power Good signal Applications Fixed switching frequency Distributed power architectures Output overcurrent protection (non-latching) Intermediate bus voltage applications Overtemperature protection Telecommunications equipment Remote On/Off Servers and storage applications Ability to sink and source current Networking equipment Cost efficient open frame design Industrial equipment Small size: 12.2 mm x 12.2 mm x 7.25 mm Vin+ Vout+ (0.48 in x 0.48 in x 0.29 in) VIN VOUT SENSE Wide operating temperature range -40C to 105C PGOOD RTUNE (Ruggedized: -D), 85C(Regular) MODULE nd UL* 60950-1, 2 Ed. Recognized, CSA C22.2 No. Cin Co 60950-1-07 Certified, and VDE 0805:2001-12 CTUNE nd (EN60950-1, 2 Ed.) Licensed ON/OFF TRIM ISO** 9001 and ISO 14001 certified manufacturing RTrim GND facilities Description TM The 6A Analog PicoDLynx power modules are non-isolated dc-dc converters that can deliver up to 6A of output current. These modules operate over a wide range of input voltage (V = 3Vdc-14.4Vdc) and provide a precisely regulated output voltage IN from 0.6Vdc to 5.5Vdc, programmable via an external resistor. Features include remote On/Off, adjustable output voltage, over TM current and over temperature protection. The Tunable Loop feature allows the user to optimize the dynamic response of the converter to match the load with reduced amount of output capacitance leading to savings on cost and PWB area. * UL is a registered trademark of Underwriters Laboratories, Inc. CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards July 21, 2014 2014 General Electric Company. All rights reserved. Data Sheet GE TM 6A Analog PicoDLynx : Non-Isolated DC-DC Power Modules 3Vdc 14.4Vdc input 0.6Vdc to 5.5Vdc output 6A Output Current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Min Max Unit Input Voltage All VIN -0.3 15 Vdc Continuous Operating Ambient Temperature All TA -40 85 C (see Thermal Considerations section) Storage Temperature All T -55 125 C stg Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Device Symbol Min Typ Max Unit Operating Input Voltage All V 3* 14.4 Vdc IN Maximum Input Current All IIN,max 5.6 Adc (VIN=3V to 14V, IO=IO, max ) VO,set = 0.6 Vdc IIN,No load 25 mA Input No Load Current (VIN = 12.0Vdc, IO = 0, module enabled) VO,set = 5Vdc IIN,No load 55 mA Input Stand-by Current All I 0.65 mA IN,stand-by (VIN = 12.0Vdc, module disabled) 2 2 Inrush Transient All It 1 A s Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 1 H source impedance V =0 to All 23 mAp-p IN 14V, IO= IOmax See Test Configurations) Input Ripple Rejection (120Hz) All -60 dB *Module needs 3.3Vin for operation at full load, -40C July 21, 2014 2014 General Electric Company. All rights reserved. Page 2