Data Sheet Date: 18-11-2010 Electronic Level: Manufacturers Code 59-017-150 Large 11mm LCD Display with optional backlight illumination Steel Working Surfaces Display Option: Degrees for Angles or % for Inclination Measuring Range Angles: 360 degrees in 4 x 90 degree segments Measuring Range Inclination: 0 100% in 8 x 45 degree segments (100% = 45 degrees) Resolution: Angles 0.1degree, Inclination 0.1% Accuracy: Angles 0.3 degree, Inclination 0.2% Display inverts automatically for use on underside of work piece Audible Signal: 0, 10, 20, 30, 40, 50, 60, 70, 80, & 90 Dimensions: 150 x 50 x 33mm Power: 3 x CR 2032 lithium cells Button Functions 1 Power: ON/OFF 2 Backlight/Audible Angle Alarm (beep) 3 Degree/Slope percentage selection 4 Absolute/Relative display selection 5 Hold Audible Beep can be selected to indicate Zero and each 10 degree position up to 90 degrees Measurement Data Hold: Press Hold Button once to hold display value (Direction Arrows will flash) Press Hold Button to release Display Hold Calibrate Button sets zero at any desired start position. Original Zero is resumed following Power Down and new Start. Auto Power Shut Off: 4 minutes, plus low battery warning Power Supply: 3 x CR 2032 3V Lithium Batteries Operating Temperature: 0 40 degrees Centigrade Dimensions: 155 x 53 x 28mm Weight: 310 grms. X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for linear tools manufacturer: Other Similar products are found below : 59-017-150 49-923-150 59-650-747 59-605-005