AEK-433-usP410 Linx Technologies

Datasheet microSplatch ANT-433-uSP410 Embedded 433 MHz LPWA Antenna The microSplatch uSP410 433 MHz antenna is a surface-mount monopole antenna for embedded Sub-1 GHz and low-power, wide-area (LPWA) applications including LoRaWAN , and remote control applications. uSP410 series monopole antennas use a grounded-line technique to achieve outstanding performance in a compact surface-mount package. The uSP410 series exhibits low proximity effect, making it a good embedded antenna choice for devices typically subject to nearby interferers. uSP410 series antennas are available in tape and reel packaging and are designed for reflow-solder mounting directly to a printed circuit board for high- volume applications. Features Applications Performance at 430 MHz to 435 MHz Low-power, wide-area (LPWA) applications VSWR: 2.2 LoRaWAN Omnidirectional radiation pattern Internet of Things (IoT) devices Compact package ISM applications 13.2 mm x 9.1 mm x 2.9 mm Smart Home networking Direct surface-mount PCB attachment Remote sensing, monitoring and control Reflow- or hand-solder assembly Security systems Resistant to proximity effect from nearby Garage/gate openers interferers Weather reporting Excellent performance with small ground plane Vending machines (38 mm x 84 mm) Hand-held devices Ordering Information Part Number Description ANT-433-uSP410 433 MHz microSplatch antenna on tape and reel (1000 per reel) AEK-433-uSP410 433 MHz microSplatch antenna evaluation kit Available from Linx Technologies and select distributors and representatives.microSplatch ANT-433-uSP410 Datasheet Electrical Specifications ANT-433-uSP410 430 MHz to 435 MHz VSWR (max) 2.2 Peak Gain (dBi) -8.0 Average Gain (dBi) -13.4 Efficiency (%) 5 Polarization Linear Radiation Omnidirectional Max Power 5 W Wavelength 1/4-wave Electrical Type Monopole Impedance 50 Connection Surface-mount Weight 0.6 g (0.02 oz) Dimensions 13.2 mm x 9.1 mm x 2.9 mm (0.52 in x 0.36 in x 0.11 in) Operating Temperature Range -40 C to +130 C ESD Sensitivity NOT ESD sensitive. As a best practice, Linx may use ESD packaging. Electrical specifications and plots measured with a 38 mm x 84 mm (1.5 in x 3.3 in) reference ground plane. VSWR Figure 1 provides the voltage standing wave ratio (VSWR) across the antenna bandwidth. VSWR describes the power reflected from the antenna back to the radio. A lower VSWR value indicates better antenna performance at a given frequency. Reflected power is also shown on the right-side vertical axis as a gauge of the percentage of transmitter power reflected back from the antenna. VSWR response typically shifts lower in frequency when the antenna is in proximity to an enclosure or printed circuit board. By allowing for this shift in the antenna design, the need for complex matching circuits is reduced. 5 40 4 30 3 20 2 10 1 0 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 Frequency (MHz) Figure 1. ANT-433-uSP410 VSWR 2 VSWR 430 435 Reflected Power (%)