X-On Electronics has gained recognition as a prominent supplier of ANT-DB1-LCD-RPS Antennas across the USA, India, Europe, Australia, and various other global locations. ANT-DB1-LCD-RPS Antennas are a product manufactured by Linx Technologies. We provide cost-effective solutions for Antennas, ensuring timely deliveries around the world.
We are delighted to provide the ANT-DB1-LCD-RPS from our Antennas category, at competitive rates not only in the United States, Australia, and India, but also across Europe and beyond. A long established and extensive electronic component distribution network has enhanced our global reach and dependability, ensuring cost savings through prompt deliveries worldwide. Client satisfaction is at the heart of our business, where every component counts and every customer matters. Our technical service team is ready to assist you. From product selection to after-sales support, we strive to deliver a seamless and satisfying experience. Are you ready to experience the best in electronic component distribution? Contact X-ON Electronics today and discover why X-On are a preferred choice for the ANT-DB1-LCD-RPS and other electronic components in the Antennas category and beyond.
Product Brief LCD Series Dual-Band WiFi Antenna The Linx LCD series dipole antenna provides a compact, affordable, easy-to-use antenna solution for single- and dual-band WiFi/WLAN as well as other 2.4 GHz or 5 GHz ISM and U-NII frequency band applications. The hinged, rotating, design of the LCD antenna allows positioning for optimum performance and reduces the potential for damage from impact compared to a fixed whip design. The LCD antenna is available with an SMA plug (male pin), or RP-SMA plug (female socket) connector for FCC Part 15 compliant applications. Features Applications Performance at 2.4 GHz to 2.485 GHz Single- and dual-band WiFi/WLAN VSWR: 1.5 802.11b/g Peak Gain: 2.8 dBi WiFi 4 (802.11n) Efficiency: 86% WiFi 5 (802.11ac) Performance at 5.15 GHz to 5.85 GHz 2.4 GHz ISM Applications VSWR: 1.5 Bluetooth Peak Gain: 4.5 dBi ZigBee Efficiency: 63% Internet of Things (IoT) devices Hinged design with detents for straight, 45 Smart Home networking degree and 90 degree positioning Sensing and remote monitoring SMA plug (male pin) or RP-SMA plug (female U-NII and ISM applications socket) Ordering Information Part Number Description ANT-DB1-LCD-SMA Antenna with SMA plug (male pin) ANT-DB1-LCD-RPS Antenna with RP-SMA plug (female socket) Available from Linx Technologies and select distributors and representatives.LCD Series Product Brief ANT-DB1-LCD-ccc Electrical Specifications ANT-DB1-LCD-ccc WiFi / ISM WiFi / U-NII Frequency Range 2.400 GHz to 2.485 GHz 5.150 GHz to 5.850 GHz VSWR (max.) 1.5 1.5 Peak Gain (dBi) 2.8 4.5 Average Gain (dBi) -0.8 -2.5 Efficiency (%) 86 63 Polarization Linear Impedance 50 Radiation Omnidirectional Max Power 10 W Wavelength 1/2-wave Electrical Type Dipole Weight 7.4 g (0.26 oz) Operating Temp. Range -40 C to +80 C Dimensions Height: 83.1 mm (3.27 in) Diameter: 9.4 mm (0.37 in) Connection SMA plug (male pin) or RP-SMA plug (female socket) Electrical specifications and plots measured with antenna, mounted on the edge, bent 90 degrees. VSWR Figure 1 provides the voltage standing wave ratio (VSWR) across the antenna bandwidth. VSWR describes the power reflected from the antenna back to the radio. A lower VSWR value indicates better antenna performance at a given frequency. Reflected power is also shown on the right-side vertical axis as a gauge of the percentage of transmitter power reflected back from the antenna. 5 40 4 30 3 20 2 10 1 0 2200 3200 4200 5200 Frequency (MHz) Figure 1. LCD Series VSWR, with Frequency Band Highlights Website: