ANT-GPS-SH-xxx Data Sheet by Product Description Side The SH Series is the flagship of the Antenna Factor 12.5 mm (0.49 ) GPS line. These high-performance GPS antennas combine superior performance, advanced operational and protection features, and low power consumption. This makes them ideal for 45.0 mm (1.77 ) telematics, fleet management, navigation, tracking and other applications that require a compact, high-performance GPS antenna. For maximum compatibility with the host receiver, the SH accepts Top supply voltages from +2.5VDC to +12VDC and is protected against shorts, over current, or reverse polarity situations. The antennas attach via a SMA, MCX, MMCX or customer-specified connector. 36.6 mm (1.44 ) Features 10.6 mm Compact (0.42 ) High-gain, low-noise design Bottom 36.5 mm Low current consumption (1.44 ) Wide operating voltage Protection circuit Wide operating temperature 11.0 mm Fully weatherized (0.43 ) 6.9 mm M2.6x0.45 Threads Waterproof (0.27 ) 3.0 mm (0.12) Deep Rugged & damage-resistant Magnetic mount Electrical Specifications Electrical Specifications Cont. Center Frequency: 1575.42MHz Current: 510mA typ. 5V Bandwidth: 10MHz 3dB point (1113mA max. 12V) Impedance: 50-ohms Oper. Temp. Range: 30C to +85C VSWR: 1.5 typ. Mounting: Magnetic and/or screw Ant. Gain: 5.0dB min. Cable: RG-174U (Low-loss, Axial Ratio: 1.0dB typ. 0.7dB/m) Elev. Angle Cov.: 590 degrees Cable Length: 117 +/6 (3m) Az. Bearing Cov.: 360 degrees Connector: SMA, MCX, MMCX, other Polarization: RHCP by special order System Gain: 28dB (typ. includes 4dB Weight: 3.32oz (94g) cable & filter loss) Ordering Information Noise Figure: <1.8dB fo, 2dB max. ANT-GPS-SH-SMA (with SMA connector) Input Voltage: +2.5VDC to +12VDC ANT-GPS-SH-MCX (with MCX connector) (Autoswitch) ANT-GPS-SH-MMX (with MMCX connector) 1 Revised 1/15/14