Datasheet CONN007-3-W N Plug Coaxial Cable Mount Connector The CONN007-3-W is an N plug cable mount connector designed for use with RG-58, RG-58/A, RG-58/B, RG-58/C, RG-141, RG-303, Belden 9907, LMR-195 or equivalent coaxial cable using the provided crimp ferrule and heat shrink tubing. Operating from 0 GHz to 11 GHz, the CONN007- 3-W provides superior performance by utilizing white bronze plating to reduce distortion caused by passive intermodulation (PIM). Additionally, all Linx connectors meet RoHS lead free standards and are tested to meet requirements for corrosion resistance, vibration, mechanical and thermal shock. Features 0 to 11 GHz operation White Bronze plating Low Passive Intermodulation (PIM) Superior corrosion resistance N plug (male pin) connection Gold plated brass center contact Crimp type coaxial cable mount for use with RG-58, RG-58/A, RG-58/B, RG-58/C, RG-141, RG-303 Belden 9907, LMR-195 Crimp ferrule and heat shrink tubing provided Electrical Specifications Impedance 50 Frequency Range 0 to 11 GHz Voltage Rating 2500 V RMS Contact Resistance Center: 1.0 m Outer: 1.0 m Selected Frequencies 2.4 GHz 6 GHz Insertion Loss (dB max) -0.25 -0.30 VSWR (max) 1.5 1.1 Ordering Information Part Number Description N plug (male pin) crimp type coaxial cable mount connector for CONN007-3-W RG-58, RG-58/A, RG-58/B, RG-58/C, RG-141, RG-303, Belden 9907, LMR-195 or equivalent coaxial cable Available from Linx Technologies and select distributors and representatives.CONN007-3-W Datasheet Product Dimensions 5/8-24UNEF 6.4 mm 4.5 mm (0.25 in) 3.1 mm REF. (0.12 in) 5.4 mm 3.2 mm (0.21 in) 1.1 mm 21.0 mm (0.13 in) (0.04 in) (0.83 in) 17.6 mm (0.69 in) 12.7 mm Center Contact (0.50 in) Crimp Ferrule Heat Shrink Tubing 14.0 mm (0.55 in) 17.0 mm 6.5 mm (0.67 in) REF. 29.8 mm (1.17 in) 25.0 mm REF. Figure 1. Product Dimensions for the CONN007-3-W Connector Connector Components Model CONN007-3-W Connector Part Material Finish Connector Body Brass White Bronze Center Contact (pin) Brass Gold Insulator PTFE Gasket Silicone Crimp Ferrule Brass White Bronze Heat Shrink Tubing PE Coaxial Cable Installation The CONN007-3-W provides a crimp type coaxial cable retention system for installation to the connector using the provided crimp ferrule and heat shrink tubing. The coaxial cable trim dimensions are provided below in Table 1 for supported coaxial cable types, and recommended hex crimp tool sizes for CONN007- 3-W are shown in Table 2. Table 1. Coaxial Cable Trim Dimensions for the CONN007-3-W Connector Coaxial Cable Types A B C RG-58, RG-58/A B C, RG-141, RG-303, 3.5 mm (0.14 in) 8.0 mm (0.31 in) 15.5 mm (0.61 in) Belden 9907, LMR-195 B B A2 A A C C Table 2. Recommended Hex Crimp Tool Sizes Connector Part Crimp Tool Size Crimp Ferrule 5.41 mm (0.213 in) Center Contact 2.54 mm (0.100 in) 2