TM HumRC Series Remote Control and Sensor Transceiver Data Guide Warning: Some customers may want Linx radio frequency (RF) Table of Contents products to control machinery or devices remotely, including machinery or devices that can cause death, bodily injuries, and/or property 1 Description damage if improperly or inadvertently triggered, particularly in industrial settings or other applications implicating life-safety concerns (Life and 1 Features Property Safety Situations). 2 Ordering Information NO OEM LINX REMOTE CONTROL OR FUNCTION MODULE 2 Absolute Maximum Ratings SHOULD EVER BE USED IN LIFE AND PROPERTY SAFETY 3 Electrical Specifications SITUATIONS. No OEM Linx Remote Control or Function Module 6 Typical Performance Graphs should be modified for Life and Property Safety Situations. Such modification cannot provide sufficient safety and will void the products 16 Pin Assignments regulatory certification and warranty. 16 Pin Descriptions Customers may use our (non-Function) Modules, Antenna and 18 Pre-Certified Module Pin Assignments Connectors as part of other systems in Life Safety Situations, but 19 Module Dimensions only with necessary and industry appropriate redundancies and in compliance with applicable safety standards, including without 20 Theory of Operation limitation, ANSI and NFPA standards. It is solely the responsibility 21 Module Description of any Linx customer who uses one or more of these products to 22 Transceiver Operation incorporate appropriate redundancies and safety standards for the Life and Property Safety Situation application. 23 Transmit Operation 24 Receive Operation Do not use this or any Linx product to trigger an action directly from the data line or RSSI lines without a protocol or encoder/ 24 Acknowledgement decoder to validate the data. Without validation, any signal from 25 Automatic Responses another unrelated transmitter in the environment received by the module could inadvertently trigger the action. 25 Permissions Mask 26 The Pair Process All RF products are susceptible to RF interference that can prevent 27 Configuring the Status Lines communication. RF products without frequency agility or hopping implemented are more subject to interference. This module does have 27 External Amplifier Control a frequency hopping protocol built in, but the developer should still be 28 Mode Indicator aware of the risk of interference. 28 Reset to Factory Default Do not use any Linx product over the limits in this data guide. 29 Using the LVL ADJ Line Excessive voltage or extended operation at the maximum voltage could cause product failure. Exceeding the reflow temperature profile could 30 Receiver Duty Cycle cause product failure which is not immediately evident. 32 Using the LATCH EN Line 32 Using the Low Power Features Do not make any physical or electrical modifications to any Linx product. This will void the warranty and regulatory and UL certifications 33 Triggered Transmissions and may cause product failure which is not immediately evident. 34 Frequency Hopping