MDEV-LICAL-MS Linx Technologies

MS Series Remote Control Decoder Data Guide Warning: Some customers may want Linx radio frequency (RF) Table of Contents products to control machinery or devices remotely, including machinery or devices that can cause death, bodily injuries, and/or property 1 Description damage if improperly or inadvertently triggered, particularly in industrial settings or other applications implicating life-safety concerns (Life and 1 Features Property Safety Situations). 1 Applications 2 Ordering Information NO OEM LINX REMOTE CONTROL OR FUNCTION MODULE SHOULD EVER BE USED IN LIFE AND PROPERTY SAFETY 2 Absolute Maximum Ratings SITUATIONS. No OEM Linx Remote Control or Function Module 2 Timings should be modified for Life and Property Safety Situations. Such modification cannot provide sufficient safety and will void the products 3 Electrical Specifications regulatory certification and warranty. 4 Pin Assignments Customers may use our (non-Function) Modules, Antenna and 6 Design Considerations Connectors as part of other systems in Life Safety Situations, but 7 A Practical Example only with necessary and industry appropriate redundancies and 8 Baud Rate Selection in compliance with applicable safety standards, including without limitation, ANSI and NFPA standards. It is solely the responsibility of any 9 Decoder Operation Linx customer who uses one or more of these products to incorporate 9 Receive Mode appropriate redundancies and safety standards for the Life and Property Safety Situation application. 9 Learn Mode 10 Latch Mode Do not use this or any Linx product to trigger an action directly from the data line or RSSI lines without a protocol or encoder/ 10 Receiver Control Mode decoder to validate the data. Without validation, any signal from 11 TX ID another unrelated transmitter in the environment received by the module 11 System Example could inadvertently trigger the action. 12 Typical Applications All RF products are susceptible to RF interference that can prevent 15 Recommended Pad Layout communication. RF products without frequency agility or hopping implemented are more subject to interference. This module does not 15 Production Considerations have a frequency hopping protocol built in. Do not use any Linx product over the limits in this data guide. Excessive voltage or extended operation at the maximum voltage could cause product failure. Exceeding the reflow temperature profile could cause product failure which is not immediately evident. Do not make any physical or electrical modifications to any Linx product. This will void the warranty and regulatory and UL certifications and may cause product failure which is not immediately evident.