Photocoupler Product Data Sheet 6N137 series Spec No.: DS70-2008-0035 Effective Date: 04/25/2014 Revision: B LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 PHOTOCOUPLER 6N137 series 1. DESCRIPTION The 6N137 consists of a high efficient AlGaAs Light Emitting Diode and a high speed optical detector. This design provides excellent AC and DC isolation between the input and output sides of the Optocoupler. The output of the optical detector features an open collector Schottky clamped transistor. The enable function allows the optical detector to be strobed. A guaranteed common mode transient immunity is up to 10kV/s at 3.3V. o o The Optocoupler operational parameters are guaranteed over the temperature range from -40 C ~ +85 C. 1.1 Features 3.3V / 5V Dual Supply Voltages Low power consumption High speed 15MBd typical 10kV/s minimum Common Mode Rejection (CMR) at V = 1000V CM o o Guaranteed AC and DC performance over temperature -40 C ~ +85 C. LVTTL/LVCMOS Compatible. Available in Dual-in-line, Wide lead spacing, Surface mounting package. Strobable output. Safety approval UL/ cUL 1577, 5000 Vrms/1 min VDE DIN EN60747-5-5, V = 567 Vpeak IORM 1.2 Applications Isolation in line receivers Digital isolation for A/D, D/A conversion Ground loop elimination Feedback Element in Switching Mode Power Supplier Pulse transformer replacement Power transistor isolation in motor drives Interface between Microprocessor system, computer and their peripheral 1.3 Functional Diagram Truth Table (Positive Logic) LED ENABLE OUT ON H L OFF H H ON L H OFF L H ON NC L OFF NC H A 0.1F bypass Capacitor must be connected between Pin8 and Pin5 Part No. : 6N137 series BNS-OD-FC002/A4 1/18