LTDL-TA25B-T1 Lite-On

LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only FEATURES * TTL INTERFACE COMPATIBLE * HIGH SPEED OPTIC SIGNAL TRANSMISSION * BUILT-IN LED DRIVER * LOW POWER CONSUMPTION * VDD Vin LED VDD Vin LED 2.7V ~ 5.25V HIGH ON FLOATING HIGH OFF 2.7V ~ 5.25V LOW OFF FLOATING LOW OFF 2.7V ~ 5.25V FLOATING OFF * WATER CLEAR COMPOUND PACKAGED. PACKAGE DIMENSIONS 1.GND 2.Vcc 3.Vin NOTES: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.15mm(.004 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Mark: Purple color. Part No. : LTDL-TA25B-T1 DATA SHEET (PRELIMINARY) Page : 1 of 5 BNS-OD-C131/A4LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only ABSOLUTE MAXIMUM RATINGS AT TA=25 PARAMETER MAXIMUM RATINGUNIT Supply Voltage (V ) -0.5 ~ +7 V DD Input Voltage (VIN) -0.5 ~ VDD +0.5 V Power Dissipation (P) 120 mW Human Body Model ESD (HBM) 3K V Machine Model ESD (MM) 300 V Operating Temperature Range -25 to + 70 Storage Temperature Range -40 to + 70 Lead Soldering Temperature 260 for 5 Seconds 1.6mm(.063 ) From Body ELECTRICAL OPTICAL CHARACTERISTICS AT TA=25 TEST PARAMETER SYMBOLMIN.TYP.MAX.UNIT CONDITION Transmission Speed Ts 25 Mbps NRZ signal Operating Voltage VDD 2.75 5.25V Peak Emission Wavelength 630 650 690 nm Peak Pc Fiber coupling light output -21 -17 -15 dBm *1 Dissipation current IDD 5 12 mA *2 High level input voltage VIH 2 V Low level input voltage VIL V 0.8 Low Highpropagation delay time ns 100 tPLH High Lowpropagation delay time ns *3 100 tPHL Pulse width distortion -15 ns t 15 W Jitter ns 15 tj Part No. : LTDL-TA25B-T1 DATA SHEET (PRELIMINARY) Page : 2 of 5 BNS-OD-C131/A4