Through-Hole Lamp LTL2H3YZ1K-132A Preliminary Ver:P001 1. Description 5mm round lamp is a popular design with a smooth uniform view angle radiation pattern suitable in Full color signboard, Billboard sign, Message sign and bus sign. High luminous intensity output has a higher emitting efficiency to save power energy. Advanced epoxy technology has a good moisture resistance and UV protection to be used in package, and it can reduce the effect of long term exposure in outdoor environment. 1. 1. Features 1.2. Applications High Luminous intensity output. Traffic sign Low power consumption & High efficiency. Superior resistance to moisture Good UV inhibitor Lead free & RoHS Compliant Lead free reflow solder compatible Popular T-1 diameter, Yellow AlInGaP 590nm Lamp, 3/4 Water clear package. Typical viewing angle 15 2. Outline Dimensions Notes : 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25mm (.010 ) unless otherwise noted. 3. Protruded resin under flange is 1.0mm (.04 ) max. 4. Lead spacing is measured where the leads emerge from the package. 5. Specifications are subject to change without notice. Part No. : LTL2V3TGX3K-032A BNS-OD-FC002/A4 1/9 Through-Hole Lamp LTL2H3YZ1K-132A Preliminary Ver:P001 3. Absolute Maximum Ratings at TA=25 Parameter Maximum Rating Unit Power Dissipation 125 mW Peak Forward Current 100 mA (Duty Cycle1/10, Pulse Width10ms) DC Forward Current 50 mA Derating Linear From 50 0.6 mA/ Reverse Voltage 5 V Operating Temperature Range -30C to + 85C Storage Temperature Range -40C to + 100C Lead Soldering Temperature 2.0mm (.079 ) From Body 260C for 5 Seconds Max. 4. Electrical / Optical Characteristics at TA=25 Parameter Symbol Min. Typ. Max. Unit Test Condition IF = 20mA Luminous Intensity IV 12000 mcd Note 1,5 Viewing Angle 21/2 15 deg Note 2,7 (Fig.6) Measurement Peak Emission Wavelength P 594 nm Peak (Fig.1) Dominant Wavelength d 586 594.5 nm Note 4 Spectral Line Half-Width 17 nm Forward Voltage VF 1.8 2.0 V IF = 20mA Reverse Current IR 100 A VR = 5V NOTE: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. 2. 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3. Iv classification code is marked on each packing bag. 4. The dominant wavelength, d is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 5. Iv guarantee must be included with 15% testing tolerance. 6. Reverse voltage (VR) condition is applied for IR test only. The device is not designed for reverse operation. 7. View angle measurement is 2 degree tolerance. Part No. : LTL2V3TGX3K-032A BNS-OD-FC002/A4 2/9