01550400Z Littelfuse

FUSEHOLDERS SPECIAL TYPES For ATO Fuses In-Line Type SPECIFICATIONS: Electrical: Intended for use with 32 volts Autofuse fuses rated to 20 or 30 amperes depending on wire size and terminal combinations. Mounting: Capable of snap-mounting to panel from rear. Fuseholders interlock for multiple mounting. Molded Parts: Black Thermoplastic (UL 94V2). Terminals: Brass. Tin-plated. Snap-lock into body. Ambient Temperature: 40C to +85C. Wire: Stranded with PVC insulation, black 14 AWG for 155 300 Series and orange 10 AWG for 155 400 Series. PATENTED ORDERING INFORMATION: Catalog Number Assembled with Assembled with Fuse 8 Wire Loop, 8 Wire Loop Amperage UNASSEMBLED Unassembled No Fuse and Fuse Rating Typical Multiple Mounting Recommended Panel Mounting Hole 155 320U 155 300 155 303A 3 (fuseholders interlocked) (.04 / .078 thick panel) (Terminals designed ( 14 wire/ 155 304A 4 .415 for 14 AWG terminals rated 155 305A 5 1.46 .410 stranded wire and to 20A). 155 37.5A 7.5 marked 14). 155 310A 10 1.10 155 315A 15 1.20 .75 1.06 155 320A 20 155 430U 155 400 155 425A 25 .970 (Terminals designed ( 10 wire/ 155 430A 30 .40 .01 R. Max. for 10 AWG terminals rated Add .400 to width for each additional fuseholder stranded wire and to 30A). marked 10). 2.5 (.098 ) For ATO Fuses P.C. Board Mount Type 21.8 (.858 ) 9.3 SPECIFICATIONS: (.366 ) Electrical: Intended for use with 32 volts ATO fuses rated to 15 amperes. 22 (.866 ) Molded Parts: Black Thermoplastic Terminals: Copper Alloy, Tin Plated Ambient Temperature: 40C to +85C. 9.3 9 (.366 ) 4.5 (.354 ) ORDERING INFORMATION: (.177 ) Ref. Catalog Number: 04450715 For MINI Fuses In-Line Type Easy Crimp Fuseholder SPECIFICATIONS: Terminals: Copper Alloy/Tin plated. Body: Black Thermoplastic. Operating Temperature: 40C to +105C. Use standard crimping tool and crimp the matted area to secure wire. (Possible crimp tool - Ideal 30-428 Toothed Die slot or equivalent). ORDERING INFORMATION: Catalog Number Description MATTED .67 153 002 20A Max. Rating Terminals will accept 1622 AWG (1.0- (CRIMP) AREA 2 .33 mm ) stranded wire (use appropriate wire size based on fuse usage). For example Use 16 AWG wire for 20A fuse67 .25 153 003 30A Max. Rating Terminals will accept 1014 AWG (5.0- 2 2.0 mm ) stranded wire (use appropriate wire size based on 2.07 Max .45 fuse usage). For example Use 10 AWG wire for 30A fuse. END VIEW SIDE VIEW Tool For Fuse Removal or Replacement Part No. 097024. Overall height with fuse installed is 1.0 Ref. 106X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Fuse Holder category: Click to view products by Littelfuse manufacturer: Other Similar products are found below : 570-290-741P40 570-290-751P40 020417G 020418E 6R30A1B F600A3B 80910030 8601.2020 G15A2SPQ 9-3557-GP REV A HDJ-B R6J30A3S HFH-1 RF30A2B RF30A3SP 15600-08-10 BK/FHN19G BK/HHM BK/HKP-CCHH BK/HKP-JJ BK/HTJ-LES-FUSE HMG- 241 HTJ-LES-FUSE C4044-1 2086-1 2193 2602 2650 178.000100 FHN31G1 T30A2B G4PB8 2660 2799 CQ-209V HKP-CCHH R6F30A2S 341001A 345621A CVRMCC 4202 4407 4408 4413 4423 4532 4537 TSD1404-12 BK/FHN31G1 BK/HC-5