Axial Lead & Cartridge Fuses 520 mm > Time-Lag Fuse > 215SP Series PS RoHS Pb E 215SP Series, 520 mm, Time-Lag Fuse Description The 215SP Series is a 5x20m Time-lag, surge withstanding ceramic body, axial-leaded cartridge fuse designed to IEC specifications. Features High breaking capacity Meets Standard Sheet 5 of IEC 60127-2 as a Time- RoHS compliant and Lag fuse lead-free Applications Agency Approvals Used as supplementary protection in appliance or utilization equipment to provide individual protection for Agency Agency File Number Ampire Range components or internal circuits. NBK080205-E10480B 1A 5A PS E NBK250702-E10480F 6.3A 10A CCC self-declaration No.: 1A - 10A 2020970207000048 Electrical Characteristics for Series SU05001-2011B 1A 2.5A SU05001-10001 3.15A 6.3A % of Ampere SU05001-10002 8A Ampere Rating Opening Time Rating SU05001-2012B 10A 1A - 3.15A 30 minutes, Maximum E10480 1A 10A 210% 4A - 6.3A 30 minutes, Maximum 29862 1A 10A 8A - 10A 30 minutes, Maximum 40013521 1A 8A 1A - 3.15A 0.75 sec. Min. 80 secs. Max. 275% 4A - 6.3A 0.75 sec. Min. 80 secs. Max. J50248091 10A 8A - 10A 0.75 sec. Min. 80 secs. Max. N/A 1A 10A 1A - 3.15A 0.095 sec. Min. 5 secs. Max. 400% 4A - 6.3A 0.150 sec. Min. 5 secs. Max. Additional Information 8A - 10A 0.150 sec. Min. 5 secs. Max. 1A - 3.15A 0.010 sec. Min150 secs. Max. 1000% 4A - 6.3A 0.010 sec. Min150 secs. Max. 8A - 10A 0.010 sec. Min150 secs. Max. Datasheet Resources Samples Electrical Characteristic Specifications by Item Agency Approvals Maximum Maximum Nominal Nominal Voltage Drop Power Amp Amp Voltage Interrupting Resistance 2 Melting I t* at Rated Dissapation at PS Code Rating Rating Rating** Cold Ohms 2 E (A sec) Current 1.5ln (Ohms) (mV) (W) 001. 1 250 0.1515 1.52000 350 2.5 x x x x x x - x 1.25 1.25 250 0.1074 3.20000 300 2.5 x x x x x x - x 01.6 1.6 250 0.0707 6.83000 200 2.5 x x x x x x - x 002. 2 250 0.0566 11.68000 190 2.5 x x x x x x - x 02.5 2.5 250 0.0386 22.29000 180 2.5 x x x x x x - x 1500 A 3.15 3.15 250 0.0283 43.25500 140 4 x x x x x x - x 250 VAC 004. 4 250 0.0185 46.96000 100 4 x x x x x x - x 005. 5 250 0.0153 66.09500 100 4 x x x x x x - x 06.3 6.3 250 0.0108 128.75000 100 4 x x x x x x - x 008. 8 250 0.0092 209.88000 100 4 x x x x x x - x 010. 10 250 0.0066 333.56500 100 4 x x x x x - x x *I2t test at 10x rated current ** Interrupting Rating may differ based on Agency Approval. See Agency Approval certificate for more details. 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 11/05/20Axial Lead & Cartridge Fuses 520 mm > Time-Lag Fuse > 215SP Series Temperature Re-rating Curve Average Time Current Curves 10000 1000 100 10 1 0.1 0.01 0.001 0.01 0.1 1 10 100 Amps Soldering Parameters - Wave Soldering Recommended Process Parameters: 300 280 Wave Parameter Lead-Free Recommendation 260 240 Preheat: (Depends on Flux Activation Temperature) (Typical Industry Recommendation) 220 200 Temperature Minimum: 100C 180 Temperature Maximum: 150C 160 140 Preheat Time: 60-180 seconds 120 100 Solder Pot Temperature: 260C Maximum 80 Solder Dwell Time: 2-5 seconds 60 40 Recommended Hand-Solder Parameters: 20 0 Solder Iron Temperature: 350C +/- 5C Heating Time: 5 seconds max. Time (Seconds) Note: These devices are not recommended for IR or Convection Reflow process. Cooling Time Preheat Time Dwell Time Different values of A and B available, please contact the Littelfuse sales representative in your region: For the pigtailed fuse, please follow the recommendations B A below for axial lead forming and mounting into PCB: Lead forming: C The distance C between cap flat surface and axial lead shall be greater than 1.0 mm. PCB mounting: C The distance between PCB and fuse cap is recommended to be a minimum of 1.5 mm. B 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 11/05/20 Temperature (C) - Measured on bottom side of board 0 10 20 30 40 50 60 70 80 90 100 110 120 130 A 140 150 160 170 180 190 200 210 220 230 240 Time (seconds) 1 1.25 1.6 2 2.5 3.15 4 5 6.3 8 10