0476008.MR Littelfuse

Surface Mount Fuses 2 NANO Fuse > 250V > Fast Acting > 476 Series PS RoHS E 476 Series Fuse Description The 476 Series is a family of 250V rated fuses with a very small 2410 footprint. It is the smallest SMD fuse with this high voltage rating and is designed to mainly serve as primary side circuit protection for compact devices with high voltage requirements. Features Small 2410 Footprint IEC 61547 Surge Compliant (tested per IEC 61000-4-5 250V Voltage Rating (1A to with a combination wave of 5A) 500V, 1.2/50us and 250A, High Interrupting Ratings 8/20us for 25W Luminaires) Agency Approvals Fast-Acting only for 3A and above RoHS Compliant and Agency Agency File Number Ampere Range Halogen-Free Wide Operating temperature E10480 1A - 15A range of -55C to 125C NBK240818-JP1021A 1A - 1.6A PS E NBK240818-JP1021B 2A - 5A Electrical Characteristics for Series Applications % of Ampere LED Lighting Power Supply Units Ampere Rating Opening Time Rating LCD/LED TVs White Goods 100% 1A - 15A 4 Hour, Minimum 125% 1A - 5A 1 Hour, Minimum 200% 1A - 15A 120 Sec., Maximum 1000% 1A - 5A 0.001 Sec., Min 0.01 Sec., Max Electrical Characteristic Agency Approvals Ampere Nominal Max Voltage Nominal Melting Rating Amp Code Interrupting Rating Cold Resistance 2 2 Rating (V) I t (A sec.) PS (A) (Ohms) E 1.00 001 250V 0.1575 0.193 x x 1.25 1.25 250V 0.122 0.276 x x 1.60 01.6 250V 0.0825 0.620 x x 2.00 002 250V 0.0448 0.530 x x 100A 250VAC 2.50 02.5 250V 300A 125VDC 0.0363 0.910 x x 10kA 86VDC 3.00 003 250V 0.0277 1.660 x x 3.50 03.5 250V 0.0234 2.356 x x 4.00 004 250V 0.01839 2.820 x x 5.00 005 250V 0.0157 4.000 x x 6.30 06.3 125V 0.0126 7.500 x - 7.00 007 125V 0.0116 7.800 x - 100A 125VAC 8.00 008 125V 0.0112 9.757 x - 300A 125VDC 10.0 010 125V 0.0096 14.879 x - 10kA 86VDC 12.0 012 125V 0.006 20.635 x - 15.0 015 125V 0.0045 61.286 x - Notes: 1. Cold resistance measured at less than 10% of rated current at 25C 2. Agency Approval Table Key: X = Approved or Certified, P=Pending and Blank=Not Approved. 2 3. I t values stated for 8msec opening time. 4. For 15A rating with 10kA 86VDC IR, please use suffix S for ordering. Refer to Part Numbering System for reference. 2018 Littelfuse, Inc. Application testing is strongly recommended. Specifications are subject to change without notice. Revision: 12/17/18Surface Mount Fuses 2 NANO Fuse > 250V > Fast Acting > 476 Series Temperature Rerating Curve Average Time Current Curves 1000 100 10 1 0.1 NOTE: Derating depicted in this curve is in addition to the standard derating of 25% for 0.01 continuous operation. 0.001 1 10 100 1000 CURRENT IN AMPERES Soldering Parameters Reflow Condition Pb free assembly t P T P Critical Zone Ramp-up T to T L P - Temperature Min (T ) 150C s(min) T L Pre Heat - Temperature Max (T ) 200C s(max) t L T S(max) - Time (Min to Max) (t ) 60 180 seconds s Ramp-down Average Ramp-up Rate (Liquidus Temp (T ) L 5C/second max. Preheat to peak) T S(min) t S T to T - Ramp-up Rate 5C/second max. S(max) L - Temperature (T ) (Liquidus) 217C L 25 Reflow time to peak temperature - Temperature (t ) 60 150 seconds L Time (t 25C to peak) +0/-5 Peak Temperature (T ) 260 C P Time within 5C of actual peak Temperature 20 40 seconds (t ) p Ramp-down Rate 5C/second max. Time 25C to peak Temperature (T ) 8 minutes max. P Do not exceed 260C 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 12/17/18 TIME IN SECONDS 1A 1.25A 1.6A 2.5A 3A 3.5A 4A 5A 6.3A 7A 8A 10A 12A 15A Temperature