High Current & Voltage Cartridge Fuse High-Current > 606 Series RoHS Pb 606 Series High-Current Fuse Description The 606 series is a 10x32mm cartridge fuse rated at 500Vac with 40A to 63A current ratings and a 2,000A 500Vac interrupting rating. It is designed for over-current protection in high voltage applications. The 606 series fuse is RoHS compliant and 100% Lead (Pb) free. Features Rated voltage 500VAC Recognized to UL/CSA/ NMX 248-1 40A to 63A rating available Conforms to EN 60127-1 and EN 60127-7 Through-hole mounting for circuit boards Agency Approvals RoHS compliant, Agency Agency File Number Ampere Range Halogen-free, and Lead- free E71611 40A to 63A J 50446306 40A to 63A Electrical Characteristics for Series Applications Uninterruptible Power Power conversion % of Ampere Rating Ampere Rating Opening Time Supply (UPS) equipment such as 100% 40A to 63A 1 Hour, Min. inverters, rectifiers, etc. Three-phase AC input 200% 40A to 63A 120 Seconds, Max. for charging pile/ Motor protection in Electric Vehicle Supply elevator systems Equipment (EVSE) Electrical Specifications by Item Agency Approvals Max Nominal Cold Nominal Watts Loss Watts Loss at Ampere Rating Interrupting Amp Code Voltage Rating Resistance Melting at 70% Rated 100% Rated (A) Rating* 2 2 (V) (mOhms) I t (A sec) Current (W) Current (W) 40 040. 1.70 2500 1.90 4.63 X X 2000A 500Vac 500Vac 50 050. 1.31 4800 2.34 5.65 X X 10KA 250Vac 63 063. 1.06 7000 2.96 7.30 X X * - Interrupting Rating may differ based on Agency Approval. See Agency Approval certificate for more details. 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/31/20High Current & Voltage Cartridge Fuse High-Current > 606 Series Temperature Re-rating Curve Average Time Current Curves 10000 1000 100 10 1 0.1 0.01 0.001 110100 1000 Current in Amperes Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. Soldering Parameters - Wave Soldering 300 Wave Parameter Lead-Free Recommendation 280 260 Preheat: (Typical Industry Recommendation) 240 (Depends on Flux Activation Temperature) 220 Temperature Minimum: 100C 200 180 Temperature Maximum: 150C 160 Preheat Time: 60-180 seconds 140 120 Solder Pot Temperature: 260C Maximum 100 Solder Dwell Time: 2-5 seconds 80 60 40 Recommended Hand-Solder Parameters: 20 Solder Iron Temperature: 350C +/- 5C 0 Heating Time: 5 seconds max. Time (Seconds) Note: These devices are not recommended for IR or Convection Preheat Time Cooling Time Dwell Time Reflow process. 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/31/20 Temperature (C) - Measured on bottom side of board 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 Time in Seconds 606040 606050 606063