Axial Lead & Cartridge Fuses 3.6 X 10 mm > Fast-Acting Fuse > 874 Series RoHS Pb 874 Series Fuse, Lead-free 3.610 mm, FastActing Fuse Description Single Pigtail Axial Lead 3.6 10mm Fast-Acting Fuse Features Designed to UL/CSA 248 Single Pigtail Axial Lead Standard format Fast Acting, Ceramic Pb-free, RoHS Compliant body fuse in a compact Available in ratings of package 0.10 to 10 Amperes Agency Approvals Applications This space saving fuse is ideally suited for lighting, power Agency Agency File Number Ampere Range supply, and adapter applications. E10480 0.100A - 10 A Electrical Characteristics Additional Information % of Ampere Opening Time Rating 100% 4 hours, Minimum 200% 5 seconds, Maximum Datasheet Resources Samples Electrical Characteristics Agency Approvals Nominal Cold Ampere Rating Voltage Rating Interrupting Nominal Melting Amp Code Resistance 2 2 (A) (V) Rating I t (A sec) (Ohms) .100 0.100 250 3.000 0.0010 x .125 0.125 250 2.0600 0.0039 x .200 0.200 250 0.9200 0.0066 x .250 0.250 250 0.6580 0.030 x .300 0.300 250 0.4350 0.039 x .400 0.400 250 0.3655 0.0578 x .500 0.500 250 0.2964 0.078 x .600 0.600 250 0.2667 0.100 x .750 0.750 250 0.2130 0.128 x .800 0.800 250 0.1600 0.215 x 001. 1.00 250 0.0860 0.406 x 01.5 1.50 250 0.0563 0.974 x 01.6 1.60 250 50A 250 VAC 0.0525 0.973 x 002. 2.00 250 0.0400 1.812 x 02.5 2.50 250 0.0329 2.675 x 3.15 3.15 250 0.0216 5.904 x 004. 4.00 250 0.0195 10.03 x 04.5 4.50 250 0.0146 14.42 x 005. 5.00 250 0.0139 14.58 x 006. 6.00 250 0.0111 23.08 x 06.3 6.30 250 0.01074 22.90 x 06.5 6.50 250 0.0100 35.24 x 007. 7.00 250 0.0099 36.90 x 008. 8.00 250 0.0087 75.63 x 010. 10.00 250 0.0066 70.10 x Note: Cold resistance measured at less than 10% of rated current at 23C. 2015 Littelfuse, Inc. Specifications are subject to change without notice. Application testing is strongly recommended. Revised: 05/12/15 Axial Lead & Cartridge Fuses 3.6 X 10 mm > Fast-Acting Fuse > 874 Series Temperature Re-rating Curve Average Time Current Curves 1000 100 10 1 Notes: Rerating depicted in this curve is in addition to the standard derating of 25% for 0.1 continuous operation. 0.01 0.001 0.1 1 10 100 1000 CURRENT IN AMPS Soldering Parameters - Wave Soldering 300 Recommended Process Parameters: 280 260 Wave Parameter Lead-Free Recommendation 240 Preheat: 220 (Typical Industry Recommendation) (Depends on Flux Activation Temperature) 200 Temperature Minimum: 100C 180 160 Temperature Maximum: 150C 140 Preheat Time: 60-180 seconds 120 100 Solder Pot Temperature: 260C Maximum 80 Solder Dwell Time: 2-5 seconds 60 40 20 Recommended Hand-Solder Parameters: 0 Solder Iron Temperature: 350C +/- 5C Time (Seconds) Heating Time: 5 seconds max. Preheat Time Cooling Time Dwell Time Note: These devices are not recommended for IR or Convection Reflow process. 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/12/15 Temperature (C) - Measured on bottom side of board 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 TIME IN SECONDS .100A .125A .200A .250A .300A .400A .500A .600A .750A .800A 1A 1.5A 1.6A 2A 2.5A 3.15A 4A 4.5A 5A 6A 6.3A 6.5A 7A 8A 10A