Axial Lead & Cartridge Fuses 3.6 X 10 mm > Slo-Blo Fuse > 875 Series RoHS Pb 875 Series Fuse, Lead-free 3.610 mm, Slo-Blo Fuse Description Single Pigtail Axial Lead 3.610mm, Slo-Blo Fuse Features Designed to UL/CSA 248 Single Pigtail Axial Lead Standard format Slo-Blo Fuse, ceramic Pb-free and RoHS body fuse in a compact Compliant package Available in ratings of 0.10 to 10 Amperes Agency Approvals Applications This space saving fuse is ideally suited for lighting, power Agency Agency File Number Ampere Range supply, and adapter applications. E10480 0.100A - 10 A Electrical Characteristics Additional Information % of Ampere Opening Time Rating 100% 4 hours, Minimum 200% 60 seconds, Maximum Datasheet Resources Samples Electrical Characteristics Agency Approvals Nominal Cold Ampere Rating Voltage Rating Interrupting Nominal Melting Amp Code Resistance 2 2 (A) (V) Rating I t (A sec) (Ohms) .100 0.100 250 3.000 0.0023 x .125 0.125 250 2.060 0.0072 x .200 0.200 250 0.921 0.0086 x .250 0.250 250 0.6575 0.038 x .300 0.300 250 0.435 0.043 x .400 0.400 250 0.321 0.136 x .500 0.500 250 0.256 0.288 x .600 0.600 250 0.151 0.611 x .800 0.800 250 0.116 0.919 x 001. 1.00 250 0.095 1.503 x 01.5 1.50 250 50A 250 VAC 0.0519 4.33 x 01.6 1.60 250 0.0476 5.08 x 002. 2.00 250 0.02887 8.45 x 02.5 2.50 250 0.02246 17.85 x 003. 3.00 250 0.0171 42.85 x 004. 4.00 250 0.0135 42.45 x 005. 5.00 250 0.00954 60.90 x 006. 6.00 250 0.00891 72.30 x 007. 7.00 250 0.008 106.80 x 008. 8.00 250 0.0077 134.59 x 010. 10.00 250 0.00675 208.00 x Notes: Cold resistance measured at less than 10% of rated current at 23C. 2015 Littelfuse, Inc. Specifications are subject to change without notice. Application testing is strongly recommended. Revised: 05/12/15Axial Lead & Cartridge Fuses 3.6 X 10 mm > Slo-Blo Fuse > 875 Series Temperature Re-rating Curve Average Time Current Curves 1000 100 10 1 Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for contin- 0.1 uous operation. 0.01 0.001 0.1 1 10 100 1000 CURRENT IN AMPS Soldering Parameters - Wave Soldering 300 Recommended Process Parameters: 280 260 Wave Parameter Lead-Free Recommendation 240 Preheat: 220 (Depends on Flux Activation Temperature) (Typical Industry Recommendation) 200 180 Temperature Minimum: 100C 160 Temperature Maximum: 150C 140 Preheat Time: 60-180 seconds 120 100 Solder Pot Temperature: 260C Maximum 80 60 Solder Dwell Time: 2-5 seconds 40 20 Recommended Hand-Solder Parameters: 0 Solder Iron Temperature: 350C +/- 5C Time (Seconds) Heating Time: 5 seconds max. Preheat Time Cooling Time Dwell Time Note: These devices are not recommended for IR or Convection Reflow process. 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/12/15 Temperature (C) - Measured on bottom side of board 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 TIME IN SECONDS .100A .125A .200A .250A .300A .400A .500A .600A .800A 1A 1.5A 1.6A 2A 2.5A 3A 4A 5A 6A 7A 8A 10A