2016L150DR Littelfuse

PTC Datasheet 2016L Series Surface Mount RoHS Description The 2016L Series PTC provides surface mount overcurrent protection for low voltage (60V) applications where resettable protection is desired. Features RoHS compliant, lead-free High voltage and halogen-free Low-profile Fast response to fault currents Applications IEEE 1 394 port protection Low voltage telecom equipment protection P owered ethernet port protection (IEEE 802.3 af) Additional Information Automotive electronic control module protection Agency Approvals Agency Agency File Number E183209 Resources Accessories Samples R50119118 Electrical Characteristics Maximum Time Agency Resistance To Trip Approvals I I V I P typ. hold trip max max d Part Number Marking (A) (A) (Vdc) (A) (W) Current Time R R min 1max (A) (Sec.) () () 2016L030 LF030 0.30 0.60 60 20 1.40 1.5 3.0 0.500 2.300 X X 2016L050 LF050 0.55 1.10 60 20 1.40 2.5 5.0 0.200 1.000 X X 2016L075/60 LF075 0.75 1.50 60 20 1.40 8.0 0.5 0.130 0.900 X X 2016L100 LF100 1.10 2.20 15 40 1.40 8.0 0.5 0.100 0.400 X X 2016L100/33 LF100-33 1.10 2.20 33 40 1.40 8.0 0.5 0.100 0.400 X X 2016L150 LF150 1.50 3.00 15 40 1.40 8.0 1.0 0.070 0.180 X X 2016L150/33 LF150-33 1.50 3.00 33 40 2.0 8.00 1.00 0.070 0.180 X X 2016L200 LF200 2.00 4.20 6 40 1.40 8.0 3.0 0.048 0.100 X X 2016L260/24 LF260-24 2.60 5.00 24 40 1.6 8.00 5.00 0.025 0.075 X X 2016L300/16 LF300 3.00 5.00 16 40 1.6 8.00 10.00 0.015 0.048 X X 2016L500 LF500 5.00 10.00 6 100 2.0 25.00 2.00 0.005 0.025 X X I = Hold current: maximum current device will pass without tripping in 20C still air. R = Typical resistance of device in initial (un-soldered) state. hold typ I = Trip current: minimum current at which the device will trip in 20C still air. R = Maximum resistance of device at 20C measured one hour after tripping or reflow soldering of 260C trip 1max for 20 sec. V = Maximum voltage device can withstand without damage at rated current (I max) max Caution: Operation beyond the specified rating may result in damage and possible arcing and flame. I = Maximum fault current device can withstand without damage at rated voltage (V ) max max * Agency Approval is Pending P = Power dissipated from device when in the tripped state at 20C still air. d R = Minimum resistance of device in initial (un-soldered) state. min Warning Exposure to silicon-based oils, solvents, electrolytes, acids, and similar materials can adversely affect the performance of these PPTC devices Users shall independently assess the suitability of these devices for each of their applications These devices undergo thermal expansion under fault conditions, and thus shall be provided with adequate Operation of these devices beyond the stated maximum ratings could result in damage to the devices and space and be protected against mechanical stresses lead to electrical arcing and/or fire Circuits with inductance may generate a voltage (L di/dt) above the rated voltage of the PPTC device. These devices are intended to protect against the effects of temporary over-current or over-temperature conditions and are not intended to perform as protective devices where such conditions are expected to be repetitive or prolonged in duration 2021 Littelfuse, Inc. 1 Specifications are subject to change without notice. Revised: GD. 05/17/21PTC Datasheet 2016L Series Surface Mount Temperature Rerating Ambient Operation Temperature -40C -20C 0C 20C 40C 50C 60C 70C 85C Part Number Hold Current (A) 2016L030 0.45 0.40 0.35 0.30 0.25 0.23 0.20 0.18 0.14 2016L050 0.93 0.95 0.65 0.55 0.42 0.38 0.33 0.30 0.23 2016L075/60 1.05 1.06 0.85 0.75 0.60 0.55 0.45 0.40 0.30 2016L100 1.66 1.47 1.29 1.10 0.91 0.83 0.73 0.64 0.50 2016L100/33 1.66 1.47 1.29 1.10 0.91 0.83 0.73 0.64 0.50 2016L150 2.26 2.00 1.76 1.50 1.24 1.13 1.00 0.87 0.68 2016L150/33 2.26 2.00 1.76 1.50 1.24 1.13 1.00 0.87 0.68 2016L200 2.80 2.50 2.19 2.00 1.84 1.74 1.50 1.34 1.14 2016L260/24 3.82 3.46 3.06 2.60 2.24 2.03 1.82 1.60 1.26 2016L300/16 4.40 3.96 3.52 3.00 2.65 2.43 2.20 1.96 1.59 2016L500 7.29 6.57 5.86 5.00 4.38 4.02 3.66 3.26 2.66 Average Time Current Curves Temperature Rerating Curve 170% 150% 130% 110% 100 90% 70% 50% 10 30% 10% -40 -30 -20 -100 10 20 30 40 50 60 70 80 85 Temperature (C) 1 Note: Typical Temperature rerating curve, refer to table for derating data 0.1 0.01 0.1 110 Current in Amperes The average time current curves and Temperature Rerating curve performance is affected by a number or variables, and these curves provided as guidance only. Customer must verify the performance in their application. 2021 Littelfuse, Inc. 2 Specifications are subject to change without notice. Revised: GD. 05/17/21 Time in Seconds 0.30A 0.50A 0.75A/60 1.00A 1.00A/33 1.50A 2.00A 1.50A/33 2.60A/24 3.00A/16 5.00A Percentage of Rated Current