Radial Lead Fuses TE5 > Fast Acting Fuse > 395 Series PS Pb RoHS E 395 Series, TE5 Fast-Acting Fuse Description The 395 Series TE5 Fuses are fast-acting type, 125V and are designed in accordance to UL 248-14. Features RoHS-compliant, Lead- Vibration resistant free and Halogen-free Available from 0.05A Reduced PCB space to 6.3A requirements Listed to UL/CSA/NMX Direct solderable or 248-1 and UL/CSA/NMX plug-in versions 248-14 Low internal resistance Conforms to DENANs Appendix 3 for the Shock safe casing Japanese Market Agency Approvals Applications Battery chargers Power supplies Agency Agency File Number Ampere Range E67006 0.05A-6.3A Consumer Electronics Industrial controllers PS E JET1896-31007-1005 1A - 5A Additional Information Electrical Characteristics % of Ampere Rating Opening Time 200% 60 Seconds, Max. Datasheet Resources Samples Electrical Characteristics Voltage Power Melting Agency Approvals Nominal Cold Amp Rated Voltage Breaking Drop Dissipation Integral Resistance Code Current Rating Capacity 1.0I 1.0I 10I N N N (Ohms) PS 2 E max. (mV) max. (mW) max. (A s) 0050 50mA 125V 8.1290 1600 85 0.0001 x - 0063 63mA 125V 4.6900 1300 85 0.0001 x - 0080 80mA 125V 3.6500 1200 100 0.0002 x - 0100 100mA 125V 7.4910 1100 110 0.0013 x - 0125 125mA 125V 6.1970 1350 160 0.0019 x - 0160 160mA 125V 4.2850 1000 150 0.0037 x - 0200 200mA 125V 2.9780 950 210 0.0075 x - 0250 250mA 125V 2.3100 900 225 0.0130 x - 0315 315mA 125V 1.7220 800 255 0.0260 x - 0400 400mA 125V 0.2200 230 95 0.0150 x - 0500 500mA 125V 100A 0.1570 220 110 0.0250 x - 125 VAC 0630 630mA 125V 0.1180 210 135 0.0450 x - 0800 800mA 125V 0.0970 200 160 0.0680 x - 1100 1.00A 125V 0.0710 190 190 0.1300 x x 1125 1.25A 125V 0.0635 180 225 0.2000 x x 1160 1.60A 125V 0.0492 170 275 0.3900 x x 1200 2.00A 125V 0.0412 160 450 0.5300 x x 1250 2.50A 125V 0.0305 150 375 1.1000 x x 1315 3.15A 125V 0.0247 140 445 1.9000 x x 1400 4.00A 125V 0.0193 130 520 3.2000 x x 1500 5.00A 125V 0.0139 120 600 6.1000 x x 1630 6.30A 125V 0.0116 115 850 9.7000 x - Notes: 1. 1.00 means the number one with two decimal places. 1,000 means the number one thousand. 2. Resistance is measured at 10% of rated current, 25C. 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised:BO.11/13/20Radial Lead Fuses TE5 > Fast Acting Fuse > 395 Series Temperature Re-rating Curve Average Time Current Curves 100000 10000 1000 100 10 1 Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.100 0.010 0.001 0.02 0.100 1 10 100 Current In Amperes Soldering Parameters - Wave Soldering Recommended Process Parameters: 300 280 Wave Parameter Lead-Free Recommendation 260 240 Preheat: 220 (Depends on Flux Activation Temperature) (Typical Industry Recommendation) 200 Temperature Minimum: 100C 180 Temperature Maximum: 150C 160 140 Preheat Time: 60-180 seconds 120 Solder Pot Temperature: 260C Maximum 100 Solder Dwell Time: 2-5 seconds 80 60 Recommended Hand-Solder Parameters: 40 Solder Iron Temperature: 350C +/- 5C 20 Heating Time: 5 seconds max. 0 Note: These devices are not recommended for IR or Convection Reflow process. Time (Seconds) Cooling Time Preheat Time Dwell Time 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised:BO.11/13/20 Temperature (C) - Measured on bottom side of board 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 Time In Seconds 0.050A 0.063A 0.080A 0.100A 0.125A 0.160A 0.200A 0.250A 0.315A 0.400A 0.500A 0.630A 0.800A 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A 5.00A 6.30A