39600500000 Littelfuse

Radial Lead Fuses TE5 > Time-Lag Fuse > 396 Series PS RoHS Pb E 396 Series, TE5 Time-Lag Fuse Description The 396 Series TE5 fuses are time-lag type, 125V rated, and are designed in accordance to UL 248-14. Features RoHS-compliant, Lead- Low internal resistance free and Halogen-free Shock safe casing Reduced PCB space Vibration resistant requirements Available from 0.05A Direct solderable or to 6.3A plug-in versions Applications Agency Approvals Battery chargers Power supplies Agency Agency File Number Ampere Range Consumer Electronics Industrial controllers E67006 0.05A - 6.3A PS JET1896-31007-1005 1A - 5A E Additional Information Electrical Characteristics % of Ampere Rating Opening Time 200% 60 Seconds, Max. Datasheet Resources Samples Electrical Characteristics Nominal Voltage Power Melting Agency Approvals Rated Voltage Breaking Cold Drop Dissipation Integral Amp Code Current Rating Capacity Resistance 1.0I 1.0I 10I PS N N N E 2 (Ohms) max. (mV) max. (mW) max. (A s) 0050 50mA 125V 12.5000 900 45 0.011 x - 0063 63mA 125V 8.7900 800 50 0.017 x - 0080 80mA 125V 6.0090 700 55 0.02 x - 0100 100mA 125V 3.8400 600 60 0.04 x - 0125 125mA 125V 2.9000 550 70 0.05 x - 0160 160mA 125V 1.7700 480 80 0.09 x - 0200 200mA 125V 1.2000 390 80 0.14 x - 0250 250mA 125V 0.7500 350 90 0.26 x - 0315 315mA 125V 0.5450 300 95 0.32 x - 0400 400mA 125V 0.3750 250 100 0.58 x - 0500 500mA 125V 100A 125 0.2470 220 110 0.86 x - VAC 0630 630mA 125V 0.1850 210 135 1.15 x - 0800 800mA 125V 0.1250 160 130 1.92 x - 1100 1.00A 125V 0.0868 155 155 3.25 x x 1125 1.25A 125V 0.0666 145 185 4.69 x x 1160 1.60A 125V 0.0502 130 210 6.76 x x 1200 2.00A 125V 0.0398 125 250 11.90 x x 1250 2.50A 125V 0.0297 120 300 17.81 x x 1315 3.15A 125V 0.0216 110 350 26.29 x x 1400 4.00A 125V 0.0164 110 400 38.40 x x 1500 5.00A 125V 0.0112 95 475 71.25 x x 1630 6.30A 125V 0.0087 95 570 144.87 x - Notes: 1. 1.00 means the number one with two decimal places. 1,000 means the number one thousand. 2. Resistance is measured at 10% of rated current, 25C. 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised:BO.11/13/20Radial Lead Fuses TE5 > Time-Lag Fuse > 396 Series Temperature Re-rating Curve Average Time Current Curves 140 100000 120 100 10000 80 60 1000 40 23C 20 100 0 -40-20 020406080 AMBIENTTEMPERATURE (C) 10 Note: 1 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.100 0.010 0.001 0.02 0.100 1 10 100 Current In Amperes Soldering Parameters - Wave Soldering Recommended Process Parameters: 300 280 Wave Parameter Lead-Free Recommendation 260 Preheat: 240 220 (Depends on Flux Activation Temperature) (Typical Industry Recommendation) 200 Temperature Minimum: 100C 180 Temperature Maximum: 150C 160 Preheat Time: 60-180 seconds 140 120 Solder Pot Temperature: 260C Maximum 100 Solder Dwell Time: 2-5 seconds 80 60 Recommended Hand-Solder Parameters: Solder Iron Temperature: 350C +/- 5C 40 Heating Time: 5 seconds max. 20 Note: These devices are not recommended for IR or Convection Reflow process. 0 Time (Seconds) Preheat Time Cooling Time Dwell Time 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised:BO.11/13/20 Temperature (C) - Measured on bottom side of board PERCENT OF RATING 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 Time In Seconds 0.050A 0.063A 0.080A 0.100A 0.125A 0.160A 0.200A 0.250A 0.315A 0.400A 0.500A 0.630A 0.800A 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A 5.00A 6.30A