Axial Lead and Cartridge Fuses Subminiature RoHS PICO II Slo-Blo Fuse 473 Series The PICO II Slo-Blo fuse combines time delay performance characteristics with the proven reliability of a PICO fuse. RoHS Compliant version now available, use ordering suffix L (see example on data sheet). ELECTRICAL CHARACTERISTICS: % of Ampere Opening Rating Time 100% 4 hours, Minimum 200% 1 second, Min. 60 seconds, Max. 300% 0.2 second, Min. 3 seconds, Max. 800% 0.02 second, Min. 0.1 second, Max. AGENCY APPROVALS: Recognized under the Components Program of Underwriters Laboratories and Certified by CSA. Approved by METI from 1 through 5 amperes. 38.1 38.1 7.11 (.280 ) (1.5 ) (1.5 ) REF. AGENCY FILE NUMBERS: UL E10480, CSA LR 29862. INTERRUPTING RATING: 3.175 (.125 ) F 1 A 50 amperes at 125 VDC/VAC L DIA. REF. ENVIRONMENTAL SPECIFICATIONS: 0.64 (.025 ) Operating Temperature: 55C to 125C. DIA. Shock: MIL-STD-202, Method 213, Test Condition I (100 Gs peak for 6 milliseconds). Vibration: MIL-STD-202, Method 201 (1055 Hz) MIL-STD-202, PACKAGING SPECIFICATIONS: Tape and Reel per EIA-296 Method 204, Test Condition C (552000 Hz at 10 Gs Peak). T1: 2.062 (52.4mm) taped spacing 4,000 per reel. Salt Spray: MIL-STD-202, Method 101, Test Condition B. Options: For RoHS Compliant devices add the letter L to end of Insulation Resistance (After Opening): MIL-STD-202, packaging suffix. Example: 473001.YRT1L (RoHS Compliant 1A, Method 302, (10,000 ohms minimum at 100 volts). 4,000 per reel). Resistance to Soldering Heat: MIL-STD-202, Method 210, Test Condition C (20 sec at 260C). Thermal Shock: MIL-STD-202, Method 107, Average Time Current Curves Test Condition B (65C to 125C). Moisture Resistance: MIL-STD-202, Method 106 11 (9098% RH), Heat (65C). 1000 PHYSICAL SPECIFICATIONS: Materials: Encapsulated, Epoxy-Coated Body Solder Coated Copper Wire Leads. RoHS Compliant Product: Pure Tin coated copper wire leads. Soldering Parameters: 100 Wave Solder 260C, 3 seconds maximum. Solderability: MIL-STD-202, Method 208. Lead Pull Force: MIL-STD-202, Method 211, Test Condition A (will withstand a 10 lb. axial pull test). PATENTED 10 ORDERING INFORMATION: Nominal Nominal 2 Catalog Ampere Voltage Resistance Melting I t 2 Number Rating Rating Cold Ohms A Sec. 1 0473.375 3/8 125 1.74 0.0850 0473.500 1/2 125 1.13 0.210 0473.750 3/4 125 0.460 0.760 0473 001 1 125 0.267 2.01 1 0473 01.5 1 /2 125 0.116 3.94 0.1 0473 002 2 125 0.0712 7.60 1 0473 2.25 2 /4 125 0.0630 9.28 1 0473 02.5 2 /2 125 0.0520 13.0 0473 003 3 125 0.0380 21.0 1 0473 03.5 3 /2 125 0.0240 26.8 0473 004 4 125 0.0194 35.0 0.01 0473 005 5 125 0.0133 54.8 0.1 1 10 100 1000 CURRENT IN AMPERES 0473 007 7 125 0.0092 105.0 391 www.littelfuse.com TIME IN SECONDS .375A .50A .75A 1.0A 1.5A 2.0A 2.5A 3.0A 3.5A 4.0A 5.0A 7.0A AXIAL LEAD AND CARTRIDGE FUSESX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Littelfuse manufacturer: Other Similar products are found below : MAC212A8G 59140-1-T-05-F 59145 4 T 02 F 59022-1-S-02-F 59075-3-S-02-A 59022-4-T-02-F V385LS40BP MDSR-7-8-10 MDRR-DT- 30-35-F GTCS36-750M-R10 Z0109MNT1G GTCA28-231M-R05 SA7.0CA RXEF185K SMD260F-2 RXEF250 00970019XP LX5090 0224006.HXUP 740GN MFP 815.650 FLA2.25 FLNR600 FLSR400 FLSR600 900-1535-012RN 901-134 970699013 971-670A-92WCN 154-KIT 155100 157.5701.6271 1.5KE110A-B 1.5SMC150CA BLF006 BLF008 JLLN600.X JLLS-250 235.200 901-152C-042RN L15S150.T 920-401X-330BN 273.100 282007 LFC600602CID LJCA030.X SE-GRM024 980-788A-070 FLNR100