55085-3M-00-0 Littelfuse

Hall Effect Sensors Miniature Vane > 55085 55085 With Integral Actuator Magnet Description The 55085 is a miniature hall effect sensor with integral actuator magnet. Actuation occurs when a suitable vane passes through the slot between the magnet and hall element. It is capable of switching up to 28Vdc and 20mA and ideally suited to position and limit sensing, security, linear actuator, industrial process control, and shaft rotation applications. Features Sensor and magnet contained in Three-pin leadout integral to sensor a single housing Reverse/Over voltage protection Sensor operates when ferrous vane Built in temperature compensation passes through slot Agency Approvals Benefits Agency Agency File Number High switching speed up to 10kHz Operates in static or dynamic Long life - up to 20 billion magnetic field operations Small package size E61760 (TBD) Unaffected by harsh environments Simple installation Applications Dimensions Dimensions in mm (inch) Position and limit sensing Linear actuators Shaft rotation sensing Angle sensing 28.00 Security systems Magnetic encoders (1.102) 9.00 Activation (.354) Dimensions in mm (inch) 3.25 TYP. 22.00 (.128) (.866) 3.60 (.148) 7.00 (2.76) 2.50 13.50 12.00 (.098) (.531) (.472) 8.50 NOM. (.335) Note: 5.08 7.70 (.200) 1. Activate Distance is approximate using a 2.54mm (.100) thick ferrous vane as illustrated. 3 2 1 (.303) Pin Out Additional Information Block Diagram VDD VDD Pin 1 Hall Rpu Datasheet Resources Samples Switch Comparator Output Plate Cn Clock OUT GND Pin 3 Pin 2 Notes: 1. Add caoacitor Cn as shown, close to the sensor, for transient suppression if required. 2. Add resistor Rpu as shown for sinking output. 2015 Littelfuse littelfuse.com Specifications are subject to change without notice.Hall Effect Sensors Miniature Vane > 55085 55085 With Integral Actuator Magnet Electrical Ratings Digital Switch Hall Type 3-Wire (Voltage Output) Absolute Range Vdc -15 to +28 1 Supply Voltage Recommended Vdc +3.8 to +24 Overvoltage Protection Vdc - max. 32 VDD - 2 Output High Voltage Vdc - min. (sinking output with internal pull-up resistor) Output Low Voltage Vdc - max. 0.4 20mA Output Current mA - max. 20 (continuously on) mA - min. 1 Current Consumption mA - max. 10.5 Switching Speed KHz-max. 10 Operating C -40 to +100 Temperature Storage C -65 to +105 Note: 1. As long as Tj (Junction Temperature) is not exceeded. 2015 Littelfuse littelfuse.com Specifications are subject to change without notice.