59060-4-S-02-A Littelfuse

Reed Sensors Firecracker > 59060 59060 Stainless Steel M8 Threaded Barrel Sensor + 57060 Actuator Description The 59060 is a small stainless steel barrel sensor with an M8 x 1.25mm pitch thread, 36mm (1.420) long with a choice of normally open, normally open high voltage, normally closed or change over contacts. It is capable of switching up to 265Vac/300Vdc at 10VA. It has a variety range of sensitivity, cable length and connector options. It functions best with the 57060 actuator. Note: The 57060 Actuator is sold separately. Features Two-part magnetically operated Choice of normally open or normal proximity sensor open high voltage contacts Stainless steel threaded barrel with Customer defined sensitivity retaining nuts options Dimensions M8 thread Choice of cable length and Dimensions in mm (inch) NUTS M8x2 M8mm PITCH Benefits NUTS M8x2 M8mm PITCH Robust construction makes this No standby power requirement sensor well suited to harsh Operates through non-ferrous industrial environments materials such as wood, plastic or Simple installation and adjustment aluminium using supplied retaining nuts 27.5 27.5 (1.08) (1.08) 36.0 Applications 36.0 (1.42) (1.42) Position and Limit Sensing Industrial Process Control Security Systems Linear Actuators NUNUTS M8x2TS M8x2 M8mm PIM8mm PITCTCH H 6.35 NOM. 6.35 NOM. (.250) (.250) 27.5 35.0 NOM. 27.5 (1.08) 35.0 NOM. (1.38) (1.08) (1.38) 36.0 300 (11.81) 10.0 (0.393) 36.0 300 (11.81) 10.0 (0.393) (1.42) Encapsulation excluded (1.42) Encapsulation excluded 2017 Littelfuse Revised: 01/13/17 littelfuse.com Specifications are subject to change without notice.Reed Sensors Firecracker > 59060 59060 Stainless Steel M8 Threaded Barrel Sensor + 57060 Actuator Electrical Ratings Normally Open Contact Type Normally Open Change Over Normally Closed HighVoltage Switch Type 1 2 3 4 1 Contact Rating VA/Watt - max. 10 10 5 5 2 Switching Vdc - max. 200 300 175 175 4 Voltage Vac - max. 140 265 120 120 3 Breakdown Vdc - min. 250 450 200 200 2 Switching Adc - max. 0.5 0.5 0.25 0.25 4 Current Aac - max. 0.35 0.35 1.0 1.0 Carry Adc - max. 1.2 1.5 1.5 1.5 Contact, Initial - max. 0.2 0.2 0.2 0.2 5 Resistance 10 10 9 9 Insulation - min. 10 10 10 10 Capacitance Contact pF - typ. 0.3 0.2 0.3 0.3 Operating C -40 to +105 -20 to +105 -40 to +105 -40 to +105 Temperature Storage C -65 to +105 -65 to +105 -65 to +105 -65 to +105 Product Characteristics 6 Operate Time ms - max. 1.0 1.0 3.0 3.0 6 Release Time ms - max. 1.0 1.0 3.0 3.0 7 Shock 11ms 12 sine G - max. 100 100 50 50 7 Vibration 50-2000 Hz G - max. 30 30 30 30 Notes: 1. Contact rating - Product of the switching voltage and current should never exceed the wattage rating. Contact Littelfuse for additional load/life information. 2. When switching inductive and/or capacitive loads, the effects of transient voltages and/or currents should be considered. Refer to Application Notes AN108A and AN107 for details. 3. Breakdown Voltage - per MIL-STD-202, Method 301. 4. Electrical Load Life Expectancy - Contact Littelfuse with voltage, current values along with type of load. 5. This resistance value is for 11.81mm wire length. Resistance changes when wire lengthens. 6. Operate (including bounce)/Release Time - per EIA/NARM RS-421-A, diode suppressed coil (Coil II). 7. Shock and Vibration - per EIA/NARM RS-421-A and MIL-STD-202. 8. For custom modifications to the wire length or size, or adding a special connector, please contact Littelfuse. Sensitivity Options (Using 57060 Actuator) Select Option S T U V Activate Activate Activate Activate Pull-In AT Distance - D Pull-In AT Distance - D Pull-In AT Distance - D Pull-In AT Distance - D Switch Type Range mm (inch) Range mm (inch) Range mm (inch) Range mm (inch) Minimum Minimum Minimum Minimum 1 Normally Open 12-18 12.0 (.472) 17-23 9.0 (.354) 22-28 7.0 (.276) 27-33 5.5 (.217) 2 High Voltage -- -- 17-23 9.0 (.354) 22-28 7.0 (.276) 27-33 5.5 (.217) 3 Change Over 15-20 12.0 (.472) 20-25 7.5 (.295) 25-30 6.0 (.236) -- -- 4 Normally Closed 15-20 12.0 (.472) 20-25 7.5 (.295) 25-30 6.0 (.236) -- -- Note: 1. Pull-In AT Range: These AT values are the bare reed switch AT before modification. Schematics Switch Type 2. The activation distance is average value on the final sensor assembly. Blue 1 and 2 Red Sensor Actuator Black Blue 3 Red Blue 4 Red D 2017 Littelfuse Revised: 01/13/17 littelfuse.com Specifications are subject to change without notice.