Reed Sensors Lever Arm Sensor > 59210 59210 Small Lever Arm Reed Sensor Description The 59210 is a small lever arm reed sensor in a clip mounting frame with low operating force and an integral two-pin connector. It has normally closed contacts. It is capable of switching up to 140Vac/200Vdc at 10W. The 59210 is available with various other arm configurations (please contact Littelfuse). It is ideally suited to paper path sensing and security system applications. Please contact Littelfuse for optional return spring and other arm configurations. Features Low operating force Clip mounting frame Variety of arm configurations Shrouded terminal accepts Molex available (contact Littelfuse) SL terminal or equivalent RoHS compliant Benefits Agency Approvals Hermetically sealed, magnetically No standby power requirement operated contacts continue to Agency Agency File Number operate long after optical and other technologies fail due to E61760 contamination Note: Contact Littelfuse for specific agency approval ratings. Applications Paper path sensing Dimensions Security system switching Dimensions in mm (inch) 3.00 (.118) 19.0 23.0 (.748) (.906) 11.58 (.456) 11.000.12 (.433.005) 24.00 (.945) 22.00 6.000.25 4.100.12 (.866) (.2360.25) (.161.005) 8.00 (.315) 1.00 21.000.12 (.039 R. MAX.) 10.00 (.827.005) (.394) 8.500.12 2.300.12 TYP. 9.00 13.00 (.335.005) (.091 DIA..005) (.354) (.512) BOARD MOUNTING DIMENSIONS MATERIAL 1.60.21 (.063.008) 2019 Littelfuse Revised: 04/29/19 littelfuse.com Specifications are subject to change without notice.Reed Sensors Lever Arm Sensor > 59210 59210 Small Lever Arm Reed Sensor Electrical Ratings Normally Contact Type Closed Switch Type 4 1 Contact Rating VA/Watt - max. 10 2 Switching Vdc - max. 200 4 Voltage Vac - max. 140 3 Breakdown Vdc - min. 250 2 Switching Adc - max. 0.5 4 Current Aac - max. 1.0 Carry Adc - max. 1.2 Contact, Initial - max. 0.2 5 Resistance 10 Insulation - min. 10 Capacitance Contact pF - typ. 0.3 Temperature Operating C -40 to +105 Product Characteristics 6 Operate Time ms - max. 1.0 6 Release Time ms - max. 1.0 7 Shock 11ms 12 sine G - max. 100 7 Vibration 50-2000 Hz G - max. 30 Notes: 1. Contact rating - Product of the switching voltage and current should never exceed the wattage rating. Contact Littelfuse for additional load/life information. 2. When switching inductive and/or capacitive loads, the effects of transient voltages and/or currents should be considered. Refer to Application Notes AN108A and AN107 for details. 3. Breakdown Voltage - per MIL-STD-202, Method 301. 4. Electrical Load Life Expectancy - Contact Littelfuse with voltage, current values along with type of load. 5. This resistance value is for 11.81mm wire length. Resistance changes when wire lengthens. 6. Operate (including bounce)/Release Time - per EIA/NARM RS-421-A, diode suppressed coil (Coil II). 7. Shock and Vibration - per EIA/NARM RS-421-A and MIL-STD-202. Part Numbering System Activation Parameters Must Actuate Must Release 59210 - 4 - T - 00 - 0 (Contacts Open) (Contacts Close) < 15 degrees rotation < 5 degrees rotation back of arm down from rest position Series Switch Type Packaging Sensitivity Quantity & Packaging Packaging Taping Quantity Packaging Option Specification Width Termination Code Mates with Molex SL series or equivalent Bulk Bulk 500 N/A N/A Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. 2019 Littelfuse Revised: 04/29/19 littelfuse.com Specifications are subject to change without notice.