B1101UALRP Littelfuse

SIDACtor Protection Thyristors SLIC Protection Battrax Series - Single Port Negative - MS-013 Description The Battrax series offers programmable SIDACtor overvoltage protection devices for SLIC applications. The Single Port Negative Battrax Series provides a programmable device that is referenced to a negative voltage souce while internal diodes provide protection from positive surge events. Features and Benets t Low voltage overshoot t Single-port protection t Gate triggered tracking t Low on-state voltage device t Does not degrade with t Integrated diodes for use Agency Approvals positive voltage t Fails short circuit when Agency Agency File Number surged in excess of ratings E133083 Applicable Global Standards Pinout Designation t TIA-968-A t IEC 61000-4-5 1 6 t I TU K.20/21 Enhanced t YD/T 1082 Level t YD/T 993 2 5 t ITU K.20/21 Basic Level t YD/T 950 3 4 t GR 1089 Inter-building t GR 1089 Intra-building Schematic Symbol (T) 6 1 (No Connect) (-V ) 2 5 (G) REF (R) (No Connect) 3 4 Electrical Characteristics V V V DRM S T I I I V Capacitance* H S T F l =5A 100V/s I =2.2 Amps Part Number Marking DRM T V min V max mA min mA max A max V max V max pF min pF max B1101UCLxx B1101UC I-V 7* * * I-V 7* * * 100 100 2.2 4 5 30 200 REF REF B1161UCLxx B1161UC I-V 7* * * I-V 7* * * 160 100 2.2 4 5 30 200 REF REF B1201UCLxx B1201UC I-V 7* * * I-V 7* * * 200 100 2.2 4 5 30 200 REF REF Notes: - V Max Value for the negative Battrax is -200 V. REF - Absolute maximum ratings measured at T = 25C (unless otherwise noted). - XX = Part Number Sufx: TP (Tube Pack) or RP (Reel Pack). A - Devices are uni-directional * Off-state capacitance (C ) is measured across pins 1 & 5 and 3 & 5 O - All electrical characteristics shown are dened from Tip (pin 1) to Ground (pin 5), and Ring at 1 MHz with a 2V bias. (pin 3) to Ground (pin 5) 2009 Littelfuse, Inc. 118 Specications are subject to change without notice. Please refer to www.littelfuse.com for current information. Battrax Single Port Neg Series SIDACtor Protection Thyristors SLIC Protection Surge Ratings I PP I TSM 1 1 1 1 1 1 1 1 1 di/dt 0.2x310 2x10 8x20 10x160 10x560 5x320 10x360 10x1000 5x310 50/60 Hz 2 2 2 2 2 2 2 2 2 0.5x700 2x10 1.2x50 10x160 10x560 9x720 10x360 10x1000 10x700 A min A min A min A min A min A min A min A min A min A min A/s max C 50 500 400 200 150 200 175 100 200 50 500 Notes: - Peak pulse current rating (I ) is repetitive and guaranteed for the life of the product. 1 Current waveform in s PP 2 Voltage waveform in s - I VSF SBOHF PG UP FS UFNQFSBU W SBUJOHT BQQMJDBCMF P * rating assumes V 7 FRVBMT PP PP REF - The device must initially be in thermal equilibrium with -40C < T < J Thermal Considerations Package Symbol Parameter Value Unit Modied MS-013 T Operating Junction Temperature Range UP C J 6 5 4 T Storage Temperature Range UP C S 1 2 R Thermal Resistance: Junction to Ambient 60 C/W 0JA 3 V-I Characteristics t x t Pulse Waveform r d +I t = rise time to peak value r V t = decay time to half value d Peak 100 Value V REF I F Waveform = t x t r d V V S DRM V T -V +V 50 I DRM Half Value I H I S I T PIN 5 CONNECTED TO GROUND 0 Pin 1-2: PIN 2 CONNECTED TO V I PIN 2 CONNECTED TO GROUNDREF PP t t r d PIN 3 CONNECTED TO V REF 0 -I t Time (s) Normalized V Change vs. Junction Temperature Normalized DC Holding Current vs. Case Temperature S 2.0 14 1.8 12 10 1.6 8 1.4 6 25C 25 C 1.2 4 2 1.0 0 0.8 -4 0.6 -6 -8 0.4 -40 -20 0 20 40 60 80 100 120 140 160 -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (T ) C J Case Temperature (T ) - C C 2009 Littelfuse, Inc. 119 Specications are subject to change without notice. Please refer to www.littelfuse.com for current information. Series Percent of V Change % S I H I Peak Pulse Current %I Ratio of PP PP I (T = 25C) H C Battrax Single Port Neg Series