B1101UC4LRP Littelfuse

SIDACtor Protection Thyristors SLIC Protection Battrax Series - Dual Port Negative - MS-013 Description The Dual Port Negative Battrax Series are programmable SIDACtor devices designed to protect SLICs (Subscriber Line Interface Circuit) from damaging overvoltage transients. Dual port protection is provided by a programmable device that is referenced to a negative voltage souce while internal diodes provide protection from positive surge events. Features and Benets t Low voltage overshoot t Dual-port protection t Low on-state voltage t Gate trigger tracking device t Does not degrade with Agency Approvals t Integrated diode for use positive voltage surges t Fails short circuit when Agency Agency File Number surged in excess of E133083 ratings Applicable Global Standards Pinout Designation t TIA-968-A t IEC 61000-4-5 1 6 t ITU K.20/21 Enhanced t YD/T 1082 Level 2 5 t YD/T 993 t ITU K.20/21 Basic Level t YD/T 950 3 4 t GR 1089 Inter-building t GR 1089 Intra-building Schematic Symbol 6 (T2) (T1) 1 5 Ground (-V ) 2 REF 4 (R2) (R1) 3 Electrical Characteristics V V V DRM S T I I I V Capacitance* H S T F l =5A 100V/s I =2.2 Amps DRM T Part Number Marking V min V max mA min mA max A max V max V max pF min pF max B1101UC4Lxx B1101UC4 I-V 7* * * I-V 7* * * 100 100 2.2 4 5 30 200 REF REF B1161UC4Lxx B1161UC4 I-V 7* * * I-V 7* * * 160 100 2.2 4 5 30 200 REF REF B1201UC4Lxx B1201UC4 I-V 7* * * I-V 7* * * 200 100 2.2 4 5 30 200 REF REF Notes: - V Max Value for the negative Battrax is -200 V. REF - Absolute maximum ratings measured at T = 25C (unless otherwise noted). - XX = Part Number Sufx: TP (Tube Pack) or RP (Reel Pack). A - Devices are uni-directional * Off-state capacitance (C ) is measured across pins 1 & 5, 3 & 5, 4 & 5, and 6 & 5 O - All electrical characteristics shown are dened from Tip (pin 1 & 6) to Ground (pin 5) and at 1 MHz with a 2V bias. Ring (pin 3 & 4) to Ground (pin 5) 2009 Littelfuse, Inc. 126 Specications are subject to change without notice. Please refer to www.littelfuse.com for current information. Battrax Dual Port Neg Series SIDACtor Protection Thyristors SLIC Protection Surge Ratings I PP I TSM 1 1 1 1 1 1 1 1 1 di/dt 0.2x310 2x10 8x20 10x160 10x560 5x320 10x360 10x1000 5x310 2 2 2 2 2 2 2 2 2 50/60 Hz 0.5x700 2x10 1.2x50 10x160 10x560 9x720 10x360 10x1000 10x700 A min A min A min A min A min A min A min A min A min A min A/s max C 50 500 400 200 150 200 175 100 200 50 500 Notes: - Peak pulse current rating (I ) is repetitive and guaranteed for the life of the product. 1 Current waveform in s PP 2 Voltage waveform in s - I VSF SBOHF PG UP FS UFNQFSBU W SBUJOHT BQQMJDBCMF P * rating assumes V 7 FRVBMT PP PP REF - The device must initially be in thermal equilibrium with -40C < T < J Thermal Considerations Package Symbol Parameter Value Unit Modied MS-013 T Operating Junction Temperature Range UP C 6 J 5 4 T Storage Temperature Range UP C S 1 2 R Thermal Resistance: Junction to Ambient 60 C/W 0JA 3 V-I Characteristics t x t Pulse Waveform r d +I t = rise time to peak value r V t = decay time to half value d Peak 100 Value V REF Waveform = t x t I r d F V V S DRM V T -V +V 50 Half Value I DRM I H I S I T 0 t t r d PIN 5 CONNECTED TO GROUND Pin 1-2: 0 t Time (s) PIN 2 CONNECTED TO V I PIN 2 CONNECTED TO GROUNDREF PP PIN 3 CONNECTED TO V REF -I Normalized V Change vs. Junction Temperature Normalized DC Holding Current vs. Case Temperature S 2.0 14 12 1.8 10 1.6 8 1.4 6 25C 25 C 1.2 4 1.0 2 0 0.8 -4 0.6 -6 0.4 -8 -40 -20 0 20 40 60 80 100 120 140 160 -40 -20 0 20 40 60 80 100 120 140 160 Case Temperature (T ) - C C Junction Temperature (T ) C J 2009 Littelfuse, Inc. 127 Specications are subject to change without notice. Please refer to www.littelfuse.com for current information. Series Percent of V Change % S I H Ratio of I (T = 25C) H C I Peak Pulse Current %I PP PP Battrax Dual Port Neg Series