Teccor brand Thyristors Standard Bidirectional SIDACs RoHS Kxxx1GL Series Description The Multipulse SIDAC is a voltage switch used in Metal- Halide lamp ignition circuits, as well as High Pressure Sodium lamp ignition circuits for outdoor street and area lighting. This robust solid-state switch is designed to handle lamp igniter applications requiring operation at ambient temperatures up to 90C where igniter circuit components can raise SIDAC junction temperature up to 125C, especially when the lamp element is removed or ruptured. Its excellent commutation time (t ) makes this robust product best COMM suited for producing multiple pulses in each half cycle of 50/60 Hz line voltage. The Multipulse SIDAC is offered in a DO-15 axial leaded package. Kxxx1GL SIDAC has a repetitive off-state blocking voltage (V ) of 180V to 270V minimum depending actual device DRM type. Blocking capability is ensured by glass passivated Schematic Symbol junctions for best reliability. The package is epoxy encapsulated with tin plated copper alloy leads. Features AC circuit oriented RoHS Compliant T riggering Voltage of 200 Applications to 380V Typical application circuit presented in Figure 10 of this data sheet (Typical Metal Halide Ignitor Circuit). Electrical Specifications Symbol Parameters Test Conditions Min Max Unit V On-state Voltage IT=1A 3 V T TA=25 C I Peak Non-Repetitive Surge Current Pulse Wave = 10s, 50 A TRM Sine Wave, f=120Hz K2201GL 200 230 K2401GL 220 250 V Breakover/Trigger Voltage V BO K2501GL 240 265 K3601GL 348 380 K2201GL 180 K2401GL 190 V Repetitive Peak Off-State Voltage V DRM K2501GL 200 270 K3601GL 50/60Hz I On-State RMS Current, T < 125C 1 A T(RMS) J Sine Wave 50/60Hz I Dynamic Holding Current, R=100 30 TYP mA H Sine Wave (V V ) 50/60Hz BO S R Switching Resistance, R = 100 S S Sine Wave (I I ) S BO See test circuit and t Commutation Time T < 125C 100 sec COMM J waveform in Figure 9 50/60Hz I Breakover Current 10 uA BO Sine Wave 60Hz 20.0 I Non-repetitive 1 cycle On-State peak value A TSM 50Hz 16.7 di/dt Critical Rate of Rise of On-State Current 150 A/sec dv/dt Critical Rate of Rise of Off-State Voltage 1500 V/sec T Storage Temperature Range -40 +125 C S 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/25/16 Teccor brand Thyristors Standard Unidirectional SIDACs Figure 2: Maximum Allowable Lead/Tab Temperature Figure 1: Characteristics vs. On-State Current +I 130 I T 120 I H R 110 S 100 I S 90 I BO I DRM -V +V 80 V BO 70 V V T S (V - V ) BO S R = V 60 S DRM (I - I ) S BO 50 0 1.0 1.5 2.0 RMS On-State Current (Amps) -I Figure 3: Power Dissipation (Typical) Figure 4: V Change BO vs. On-State Current vs. Junction Temperature 4.0 4 K2x01GL 3.5 2 3.0 0 2.5 -2 2.0 -4 1.5 -6 K3x01GL 1.0 -8 0.5 -10 0.0 -40 -25 025 45 65 85 105 125 145 0.0 0.5 1.0 1.5 Junction Temperature (C) RMS On-State Current (Amps) Figure 5: Pulse On-State Figure 6: Maximum Allowable Ambient Temperature Current Rating vs. On-State Current 1000 140 di/dt limit I CURRENT WAVEFORM: Sinusoidal - 60Hz TM LOAD: Resistive or Inductive 120 FREE AIR RATING t O f = 5Hz 1/f 120 Hz 100 100 T =125C J 60 Hz 1KHz 80 5KHz 10 60 40 25 1 20 110 100 1000 0.00.2 0.40.6 0.81.0 Pulse Base Width (t )-s O RMS On-State Current I - Amps T(RMS) 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/25/16 Average P (Watts) D Repetitive Peak On-State Current (I )-Amps TRM Normalized Percentage of V Change (%) Maximum Allowable Ambient Temperature Maximum Allowable Lead (T ) - C A Temperature (C)