MKP1V120 Series Sidac High Voltage Bidirectional Triggers Bidirectional devices designed for direct interface with the ac power line. Upon reaching the breakover voltage in each direction, the device switches from a blocking state to a low voltage onstate. Conduction MKP1V120 Series ELECTRICAL CHARACTERISTICS (T = 25C unless otherwise noted Electricals apply in both directions) C Characteristic Symbol Min Typ Max Unit OFF CHARACTERISTICS Repetitive Peak OffState Current T = 25C I 5.0 A J DRM (50 to 60 Hz Sine Wave) V = 90 V, MKP1V120, MKP1V130 and MKP1V160 DRM V = 180 V, MKP1V240 DRM ON CHARACTERISTICS Breakover Voltage V V BO I =35 A MKP1V120 BO 110 130 35 A MKP1V130 120 140 200 A MKP1V160 150 170 35 A MKP1V240 220 250 Peak OnState Voltage V 1.3 1.5 V TM (I = 1 A Peak, Pulse Width 300 s, Duty Cycle 2%) TM Dynamic Holding Current I 100 mA H (Sine Wave, 50 to 60 Hz, R = 100 Ohm) L Switching Resistance R 0.1 k S (Sine Wave, 50 to 60 Hz) DYNAMIC CHARACTERISTICS Critical RateofRise of OnState Current, di/dt 120 A/ s Critical Damped Waveform Circuit (I = 130 Amps, Pulse Width = 10 sec) PK ORDERING INFORMATION Device Package* Shipping MKP1V120RLG 5000 / Tape & Reel MKP1V130RLG 5000 / Tape & Reel MKP1V160G 1000 Units / Bulk DO41, Axial Lead MKP1V160RLG 5000 / Tape & Reel MKP1V240G 1000 Units / Bulk MKP1V240RLG 5000 / Tape & Reel *This package is inherently PbFree. For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.