P0300EBMCLRP2 Littelfuse

SIDACtor Protection Thyristors TM Broadband Optimized Protection RoHS e3 MC Series - TO-92 Pb Description The MC Series TO-92 are low capacitance SIDACtor thyristors designed to protect broadband CPE equipment such as VoIP and DSL Modems from damaging overvoltage transients. The series provides a through-hole solution that enables CPE equipment to comply with global regulatory standards while limiting the impact to broadband signals. Features and Benefits Low voltage overshoot 40% lower capacitance than our Baseband Low on-state voltage Protectors, for Agency Approvals Does not degrade applications that surge capability after demand greater signal Agency Agency File Number multiple surge events integrity within limit E133083 Pb-free E3 means 2nd Fails short circuit when level interconnect is Pb- surged in excess of free and the terminal Pinout Designation ratings finish material is tin(Sn) (IPC/JEDEC J-STD- RoHS Compliant 609A.01) Applicable Global Standards Pin 1 Pin 3 TIA-968-A GR 1089 Intra-building Schematic Symbol TIA-968-B IEC 61000-4-5 2nd edition ITU K.20/21/45 Enhanced Level YD/T 1082 ITU K.20/21/45 Basic YD/T 993 Level YD/T 950 GR 1089 Inter-building Electrical Characteristics V V V Capacitance DRM S T I I I H S T l =5A 100V/s I =2.2 Amps 1MHz, 2V bias DRM T Part Number Marking V min V max mA min mA max A max V max pF min pF max P0080ECMCLxxx P0080ECMC 6 25 50 800 2.2 4 35 75 P0300ECMCLxxx P0300ECMC 25 40 50 800 2.2 4 25 45 P0640ECMCLxxx P0640ECMC 58 77 150 800 2.2 4 55 85 P0720ECMCLxxx P0720ECMC 65 88 150 800 2.2 4 50 75 P0900ECMCLxxx P0900ECMC 75 98 150 800 2.2 4 45 70 P1100ECMCLxxx P1100ECMC 90 130 150 800 2.2 4 45 70 P1300ECMCLxxx P1300ECMC 120 160 150 800 2.2 4 40 60 P1500ECMCLxxx P1500ECMC 140 180 150 800 2.2 4 35 55 P1800ECMCLxxx P1800ECMC 170 220 150 800 2.2 4 35 50 P2300ECMCLxxx P2300ECMC 190 260 150 800 2.2 4 30 50 P2600ECMCLxxx P2600ECMC 220 300 150 800 2.2 4 30 45 P3100ECMCLxxx P3100ECMC 275 350 150 800 2.2 4 30 45 P3500ECMCLxxx P3500ECMC 320 400 150 800 2.2 4 25 40 Notes: - Absolute maximum ratings measured at T = 25C (unless otherwise noted). A - Components are bi-directional. - XXX Part Number Suffix: AP (Ammo Pack), or RP1 or RP2 (Reel Pack),. 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/23/17 SIDACtor Protection Thyristors TM Broadband Optimized Protection Surge Ratings I PP I TSM 1 1 1 1 1 1 1 1 1 di/dt 0.2/310 2/10 8/20 10/160 10/560 5/320 10/360 10/1000 5/310 50/60 Hz 2 2 2 2 2 2 2 2 2 0.5/700 2/10 1.2/50 10/160 10/560 9/720 10/360 10/1000 10/700 A min A min A min A min A min A min A min A min A min A min A/s Max C 50 500 400 200 150 200 175 100 200 30 500 Notes: 1 Current waveform in s 2 Voltage waveform in s - Peak pulse current rating (I ) is repetitive and guaranteed for the life of the product that PP remains in thermal equilibrium. - I ratings applicable over temperature range of -40C to +85C PP - The component must initially be in thermal equilibrium with -40C < T < +150C J Thermal Considerations Package Symbol Parameter Value Unit TO-92 T Operating Junction Temperature Range -40 to +150 C J T Storage Temperature Range -65 to +150 C S R Thermal Resistance: Junction to Ambient 90 C/W 0JA V-I Characteristics t x t Pulse Waveform r d +I t = rise time to peak value r t = decay time to half value d Peak 100 I T Value I S Waveform = t x t r d I H I DRM 50 -V +V Half Value V V DRM T V S 0 t t r d 0 t Time (s) -I Normalized V Change vs. Junction Temperature Normalized DC Holding Current vs. Case Temperature S 2.0 14 1.8 12 1.6 10 8 1.4 6 25C 1.2 25 C 4 2 1.0 0 0.8 -4 0.6 -6 -8 0.4 -40 -20 020406080100 120140 160 -40 -20 020406080100 120140 160 Junction Temperature (T ) C J Case Temperature (T ) - C C 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/23/17 Series Percent of V Change % S I I Peak Pulse Current %I H PP PP Ratio of I (T = 25C) H C