SIDACtor Protection Thyristors High Surge Current Protection RoHS e3 Pb SIDACtor Primary Protection Balanced Series - Modified TO-220 Description The SIDACtor Primary Protection Balanced Series Modified TO-220 thyristors are components designed for use in primary protection applications. The series provides a single port overvoltage solution that enables applications to comply with the balance requirements of GR-974 and GTS-8700. Please contact Littelfuse to discuss your particular application and regulatory requirements. Features and Benefits High holding current ratings Agency Approvals options available Single-port protection Balanced overvoltage Modified TO-220 Package Agency Agency File Number protection Lead forms available E133083 Failsafe option available RoHS Compliant Low voltage overshoot Pb-free E3 means 2nd Pinout Designation Low on-state voltage level interconnect is Pb-free and the terminal Does not degrade surge finish material is tin(Sn) capability after multiple IPC/JEDEC J-STD- surge events within limit. 609A.01 Fails short circuit when surged in excess of PIN 1 PIN 3 PIN 2 Applicable Global Standards Schematic Symbol GR-974 UL 497 1 3 (T) (R) GTS-8700 ITU K.28 2 (G) Electrical Characteristics Capacitance V V V I = DRM S T T I * I I H S T l =5A 100V/s 2.2 Amps Pin 1-2 / 3-2 Pin 1-3 DRM Part Number Marking Tip-Ground, Ring-Ground Tip-Ring V min V max mA mA A V max Pins 1-2, 3-2, 1-3 min max max pF min pF max pF min pF max P1553ACLxx P1553AC 130 180 150 800 2.2 8 65 95 40 60 P1803ACLxx P1803AC 150 210 150 800 2.2 8 55 85 35 55 P2103ACLxx P2103AC 170 250 150 800 2.2 8 55 85 30 55 P2353ACLxx P2353AC 200 270 150 800 2.2 8 50 75 30 50 P2703ACLxx P2703AC 230 300 150 800 2.2 8 50 75 30 50 P3203ACLxx P3203AC 270 350 150 800 2.2 8 45 70 25 45 P3403ACLxx P3403AC 300 400 150 800 2.2 8 45 65 25 45 P5103AC P5103ACLxx 420 600 150 800 2.2 8 40 60 20 40 Notes: * Higher holding current available by special order. Contact Littelfuse for additional - Off-state capacitance (C ) is measured at 1 MHz with a 2 V bias. O information. - xx Part Number Suffix: RP (Reel pack), Blank (Bulk pack), 60 (Type 60 lead form bulk - Absolute maximum ratings measured at T = 25C (unless otherwise noted). A pack), FS1 (Failsafe option bulk pack). Refer to Part Numbering section for additional - Components are bi-directional. details. 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/23/17 SIDACtor Protection Thyristors High Surge Current Protection Surge Ratings I PP I TSM 1 1 1 1 1 1 1 1 1 di/dt 0.2/310 2/10 8/20 10/160 10/560 5/320 10/360 10/1000 5/310 50/60 Hz 2 2 2 2 2 2 2 2 2 0.5/700 2/10 1.2/50 10/160 10/560 9/720 10/360 10/1000 10/700 A min A min A min A min A min A min A min A min A min A min A/s max C 50 500 400 200 150 200 175 100 200 50 500 Notes: - Peak pulse current rating (I ) is repetitive and guaranteed for the life of the product in 1 Current waveform in s PP thermal equilibrium. 2 Voltage waveform in s - I ratings applicable over temperature range of -40C to +85C PP - The component must initially be in thermal equilibrium with -40C < T < +150C J Thermal Considerations Package Symbol Parameter Value Unit Modified T Operating Junction Temperature Range -40 to +150 C J TO-220 T Storage Temperature Range -65 to +150 C S PIN 1 PIN 3 R Thermal Resistance: Junction to Ambient 50 C/W 0JA PIN 2 V-I Characteristics t x t Pulse Waveform r d +I t = rise time to peak value r t = decay time to half value d Peak I T 100 Value I S I H Waveform = t x t r d I DRM -V +V 50 Half Value V V T DRM V S 0 t t r d 0 t Time (s) -I Normalized V Change vs. Junction Temperature Normalized DC Holding Current vs. Case Temperature S 2.0 14 1.8 12 10 1.6 8 1.4 6 25C 25 C 1.2 4 2 1.0 0 0.8 -4 0.6 -6 0.4 -8 -40 -20 020406080100 120140 160 -40 -20 020406080100 120140 160 Junction Temperature (T ) C Case Temperature (T ) - C J C 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/23/17 Series Percent of V Change % S I I Peak Pulse Current %I H PP PP Ratio of I (T = 25C) H C