P3800MEL Littelfuse

SIDACtor Protection Thyristors High Surge Current Protection RoHS Pb e3 Pxxx0ME 5kA SIDACtor Series in TO-218 Description The 5kA series SIDACtor components are designed to protect equipment located in high exposure environments from severe overvoltage transients. Setup in a robust TO-218 package, the 5kA series are ideal for use in data interface and AC power line for CATV amplifiers, Telecom Base Station equipment and Cell Towers. Agency Approvals Features and Benefits nd Agency Agency File Number Low voltage overshoot Pb-free E3 means 2 level interconnect is Pb-free and Low on-state voltage E133083 the terminal finish material Does not degrade surge is tin(Sn) (IPC/JEDEC capability after multiple J-STD-609A.01) Pinout Designation surge events within limit. RoHS compliant, lead-free 2 Fails short circuit when and halogen-free surged in excess of rating UL Recognized as an Rugged TO-218 package Isolated Loop Circuit Protector to UL 497B 5000A 8/20 s surge rating 3 (No 1 2 Connection) Applicable Global Standards Schematic Symbol TIA-968-A GR 1089 Intra-building nd TIA-968-B IEC 61000-4-5 2 Edition 12 ITU K.20/21/45 Enhanced YD/T 1082 Level YD/T 993 ITU K.20/21/45 Basic YD/T 950 Level GR 1089 Inter-building Electrical Characteristics V V V Capacitance DRM S T I I I H S T l =5A 100V/s I =2.2 A 1MHz, 2V bias DRM T Part Number Marking V min V max mA min mA max A max V max pF min pF max P1500MEL P1500ME 140 180 50 800 2.2/25 4 400 650 P1900MEL P1900ME 155 220 50 800 2.2/25 4 400 650 P2300MEL P2300ME 180 260 50 800 2.2/25 4 350 600 P2600MEL P2600ME 220 300 50 800 2.2/25 4 300 600 P3100MEL P3100ME 275 350 50 800 2.2/25 4 300 550 P3500MEL P3500ME 320 400 50 800 2.2/25 4 300 500 P3800MEL P3800ME 350 430 50 800 2.2/25 4 300 500 P4800MEL P4800ME 450 600 20 800 2.2/25 4 300 500 Notes: 1. Absolute maximum ratings measured at T = 25C (unless otherwise noted). A 2. Components are bi-directional (unless otherwise noted). 3. I is a free air rating and heat sink is at 25A T 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/04/19 SIDACtor Protection Thyristors High Surge Current Protection Surge Ratings I Notes: PP I 1. Voltage waveform in s TSM di/dt 1 1 1 2. Current waveform in s 1.2/50 10/350 10/1000 50 / 60 Hz Series 2 2 2 3. For surge rating of P3800MEL, it is minimum 4kA and typical 5kA 8/20s. 8/20 1.2/50 10/1000 A min A min A min A min A/s max - Peak pulse current rating (I ) is repetitive and guaranteed for the life of the product. PP - The component must initially be in thermal equilibrium with -40C < T < +150C 3 J E 5000 1500 1100 400 630 Thermal Conditions Package Symbol Parameter Value Unit TO-218 T Operating Junction Temperature Range -40 to +150 C J 2 T Storage Temperature Range -65 to +150 C S T Maximum Case Temperature 100 C C R * Thermal Resistance: Junction to Case 1.7 C/W 0JC R Thermal Resistance: Junction to Ambient 56 C/W 1 2 3 (No 0JA Connection) *R rating assumes the use of a heat sink and on state mode for extended time at 25 A, with average power dissipation of 29.125 W. 0JC V-I Characteristics t x t Pulse Waveform r d +I t = rise time to peak value r t = decay time to half value d Peak 100 I T Value I S Waveform = t x t r d I H I DRM -V +V 50 Half Value V V DRM T V S 0 t t r d 0 t Time (s) -I Normalized V Change vs. Junction Temperature Normalized DC Holding Current vs. Case Temperature S 2.0 14 1.8 12 10 1.6 8 1.4 6 25C 25 C 1.2 4 2 1.0 0 0.8 -4 0.6 -6 -8 0.4 -40 -20 020406080 100 120 140 160 -40 -20 020406080 100 120 140 160 Junction Temperature (T ) C J Case Temperature (T ) - C C 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/04/19 Percent of V Change % S I H Ratio of I Peak Pulse Current %I PP PP I (T = 25C) H C