PDM21001LXM Littelfuse

Commercial Vehicle Product Datasheet HWB60 SEALED POWER DISTRIBUTION MODULE Compact Hard-wired PDM for 280 Style Components Specifications Overview Max Fuse Rating: 30A per circuit Max Continuous Current: 250A Number of Cavities 60 Mounting Torque: 4-6 Nm Operating Temp: -40 C to 85 C Description Ingress Protection: IP67/IP69K Due to its compact size the Littelfuse HWB60 PDM is the perfect fit for accessory circuits and overflow circuits from your main PDM. But in conjunction with its durable, IP rated Applications construction this unit also makes a suitable main module on Accessory Circuits smaller vehicles. With the elimination of internal bussing the Overflow Circuits user can customize their own circuitry utilizing direct wire-to- Primary on Small Vehicles component connections. Web Resources Features/Benefits Download 2D print and technical resources at: The elimination of internal bussing allows user to littelfuse.com/HWB60 customize their own circuitry with direct wire-to- component connections. User can install any mini (280 style) circuit protection component. Ordering Information Compact size. PDM is perfect fit for accessory circuits, overflow circuits from main PDM, or as a main module on PART NUMBER DESCRIPTION smaller vehicles. IP67/IP69K sealed units can be installed virtually PDM21001LXM Complete Assembly: Base, cover, gasket and 6 TPAs anywhere on the vehicle. HWB60 stands up to road splash and salt spray, and gives robust protection to devices. TPAs (terminal position assurance locks) give secondary locking protection of the wire leads, which aid in Accessories and Service Parts prevention of leads from being pulled out. TPAs snap onto the back of the HWB60 after wires are installed, and do PART NUMBER DESCRIPTION not interfere with the cable seals needed to ensure IP protection. 868-163 Base Easy to connect. Wires plug into the back of the unit using industry-standard Delphi Metri-Pack Series 280 tanged 873-029 Cover terminals. Modular. Multiple HWB60s can be dovetailed together 901-315 Gasket to expand circuit protection capacity. They can also be interlocked to other Littelfuse PDMs and fuse holders 883-083 TPA (6 needed per assembly) (i.e. FLEC, MEGA Flex holder, MIDI Flex holder, etc.) for complete system protection. Cover tethers also available to prevent loss of component during service. 1 of 2 littelfuse.com 2017 Littelfuse Commercial Vehicle Products Rev: 111517Commercial Vehicle Product Datasheet HWB60 SEALED POWER DISTRIBUTION MODULE Specifications Max Fuse Rating 30A per circuit Max Continuous Current 250A Number of Cavities 60 Recommended Mounting M6 bolt and lock washer Mounting Torque 4-6 Nm Temperature Range -40 C to +85 C Ingress Protection Rating IP67/IP69K Dimensions 113x52x81 mm Labels Consult Littelfuse for label options Wire Sizes 0.35-5.00 mm Mating Terminals & Seals Delphi Metri-Pack 280 Sealed female (tanged) See chart below for details. Sold separately. Accessories Optional: Cover tether Mating Terminals and Seals Compatibility 2 Wire Size Range (mm ) Insulation Diameter (mm) Terminal Cable Seal Cable Plug 0.50-0.35 mm 1.84-2.51 mm 12084201 12089679 / 12041351 12010300 1.00-0.80 mm 2.03-3.12 mm 12077411 12041351 / 12015323 12010300 3.00-2.00 mm 2.45-3.80 mm 12129493 12015323 / 12015359 12010300 Sold separately. Available from Delphi. Dimensions in millimeters Visit Littelfuse.com for the most up-to-date product information. Littelfuse reserves the right to make product changes, without notice. Material in this document is as accurate as known at the time of publication. 2 of 2 littelfuse.com 2017 Littelfuse Commercial Vehicle Products Rev: 111517