PLED310S Littelfuse

PLED Application in Ballast Output LED Driver for Ignition PLED Open LED Protectors PLED Ultra Low Holding Current Series RoHS PLED Ultra Low Holding Current Series Description This PLED ultra-low holding current series exhibits a low holding current parameter that makes it compatible with LED lighting strings. The series provide a switching electronic characteristics for an fluorescent tube replacement by an LED string. It helps to make the Fluorescent ballast and LED string compatible with each other. This ensures the ballast will be able to activate the LED string especially for those ballast that need a high voltage output detection during ignition.The PLED ultra- low I makes the LED driver widely used in the output H of fluorescent tubes a compatible direct replacement for indoor and outdoor LED lighting strings. Schematic Symbol Features & Benefits Fast switching ESD protection of data lines in accordance with A utomatically resets after IEC 61000-4-2 (IEC 801-2) power cycle Control Compatible with industrial Circuit Available in low profile, lighting environments Standard DO-214AA packages RoHS compliant and halogen-free IEC-61000-4-2 ESD 30kV (Air), 30kV (Contact) Electrical Characteristics (All parameters are measured at T =25C unless otherwise noted) A V BR V I = 1 Critical rate of T T 1 V I I I DRM H S O Amp rise dV/dt Breakdown Part Number Marking Volts Volts mAmps mAmps Volts Amps Volts Min Max Min Max Max Max Max Min PLED64S PL64 58 71 56 21 800 2 1.0 250V/s PLED70S PL70 65 81 63 21 800 2 1.0 250V/s PLED90S PL90 75 90 73 21 800 2 1.0 250V/s PLED110S PL110 90 120 87 21 800 2 1.0 250V/s PLED130S PL130 120 149 116 21 800 2 1.0 250V/s PLED150S PL150 136 167 132 21 800 2 1.0 250V/s PLED180S PL180 170 203 165 21 800 2 1.0 250V/s PLED230S PL230 190 240 184 21 800 2 1.0 250V/s PLED260S PL260 220 274 213 21 800 2 1.0 250V/s PLED310S PL310 275 330 267 21 800 2 1.0 250V/s PLED350S PL350 320 380 310 21 800 2 1.0 250V/s PLED380S PL380 350 430 340 21 800 2 1.0 250V/s 2 PLED450S PL450 410 495 397 21 800 2 1.0 250V/s 2 PLED480S PL480 450 600 436 21 800 2 1.0 250V/s note: 1. I - Operation current tested aluminum boards, ambient temp 85C O 2. PLED450S and PLED480S are still under developed, please contact local sales representative for further information 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 10/15/18PLED Application in Ballast Output LED Driver for Ignition PLED Open LED Protectors PLED Ultra Low Holding Current Series Thermal Considerations Package Symbol Parameter Value Unit T Operating Junction Temperature Range -40 to +125 C J DO-214 T Storage Temperature Range -65 to +150 C S 1 90 R Thermal Resistance: Junction to Ambient C/W JA 2 40 Notes: 1) Standard FR-4 PCB with Copper Pads (Recommended Size) 2) Aluminum PCB Thickness: 1.6mm Grade: 1-2 W/mK Thermal Conductivity Trace thickness: 2 oz Insulation layer thickness: 215 um Solder Pad Dimensions: 2.0mm x 2.8mm (Recommended Size) V-I Characteristics V vs. Junction Temperature BR +I 14 12 I T 10 I S 8 I H 6 25 C 4 -V +V 2 V V DRM T 0 V BR -4 -6 -8 0 20 40 60 80 100 120 140 160 -40 -20 -I Junction Temperature (T ) C J Normalized DC Holding Current vs. Case Temperature 2.0 1.8 1.6 1.4 25 C 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160 Case Temperature (T ) C C 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 10/15/18 i H R atio of i (T =) 2 5 C H C P ercVent of C%hange BR