Accessories Enclosures and Mounting Adapters ENCLOSURES, BRACKETS, CLIPS, DIN RAIL & MOUNTING ADAPTERS ENCLOSURES Product Features Accessory For NEMA-3R-L A Metal NEMA-3R electrical box with lenses for viewing the Single-Phase PumpSaver single-phase PumpSaver status lights. H 6 x W 6 D x 4 Enclosure Steel enclosure for protecting a Littelfuse RM1000 remote communications monitor from adverse affects of weather and vandalism, while allowing normal communications connections to the RM1000 unit. Its superior design protects an RM1000 from RM-1000-ENCL overexposure to UV sunlight as well as from hail during a storm, RM1000 and it incorporates a seal around the opening in the back to seal Enclosure the unit to the electrical box, keeping rain from contacting the RM1000 connections. The enclosure also features a built-in padlock tab (padlock not included) to lock the cover to deter vandalism. H 6.4 x W 6.3 x D 1.7 DIN RAIL & MOUNTING ADAPTERS Product Features Accessory For Industry standard 35 mm aluminum or steel DIN rail. C103PM (Al) Can be used with all DIN Rail C103PM aluminum rail is available in a 36 in. compatible units. DIN Rail (91.4 cm) length. Allows any 2 x 2 in. (50.8 x 50.8 mm) or 2 x 3 in. (50.8 x 76.2 mm) module to be mounted on a 35 mm P1023-20 DIN type rail. Comes complete with mounting Consult the individual datasheet to hardware (one 10 - 24 x 1.00 screw and one determine part compatibility. DIN Rail Mount Adaptor 10 - 24 x 1.25 screw) for 0.75 in. (19 mm) and 1 in. (25.4 mm) thick modules. BRACKETS & CLIPS Product Features Accessory For Designed for use with P1011-6 socket. Securely PSCRB8 mounts 8-pin plug-in controls in any position, and P1011-6 Hold-down Brackets provides protection against vibration. Sold in pairs. Securely mounts plug in controls in any position. PSC8 Also provides protection against vibration. Select the PSC11 NDS-8 Socket NDS-11 Socket PSC8 for use with NDS-8, or the PSC11 for use with Hold-down Clips NDS-11 sockets. Sold in pairs. Timers Series: MSM P1023-2 Removable P clamp bracket for mounting MSM Series timers and FS100 and FS400 Series flashers. Flasher Series: FS100 FS400 P Clamp 2016 Littelfuse Protection Relays & Controls Rev: 1-A-062916 www.littelfuse.com/relayaccessories2.6 +/-.02 (66.0 +/-.5) Accessories Enclosures and Mounting Adapters BRACKETS & CLIPS Add back DIN rail adapter here BRACKETS & CLIPS Product Features Accessory For BZ1 Front Panel Mount Kit Series: ARP FS500 LLC4 LLC5 LLC6 Provides an easy method of through-the-panel mounting of 8-pin or 11-pin plug-in timers, flashers, PLM PLMU PLR PLS PRLM 1.9 +/-.02 (48.3 +/-.5) and other controls. May be mounted in panels up to TDB TDBH TDBL TDI TDIH 0.125 in. (3.2 mm) thick. Includes two clamps and TDIL TDM TDMB TDMH TDML PANEL OPENING two screws. TDR TDS TDSH TDSL TRB TRDU TRM TRS TRU Illustrates panel opening size Inches (Millimeters) required to mount BZ1. P1023-6 P1023-7 Provides a convenient method of mounting modules. Mounting Brackets The 90 orientation of mounting slots makes installation/removal of modules quick and easy. Made from steel with a cadmium surface finish. 0.56 Used on many 2 x 2 timers. Refer to 0.19 (14.3) (4.8) 1.5 individual series datasheet to determine (38.1) PART MOUNTING MOUNTING METHOD 0.47 (11.9) NUMBER HOLE SIZE if this accessory is compatible. d 1.25 P1023-6 0.19 in. (4.8 mm) 8 (M4 x 0.7) screw (31.8) P1023-7 0.25 in (6.35 mm) Mini-Pot 2.1 (53.3) Inches (Millimeters) P0500-178 Surface Mount Adapter ASXX/DSXX P0500-178 is surface mountable with 2 Quick Mount Fasteners. Series Timers Inches (Millimeters) P0500-179 DIN Rail Mount Adapter ASXX/DSXX P0500-179 snaps onto DIN Rail. Series Timers Inches (Millimeters) 2016 Littelfuse Protection Relays & Controls Rev: 1-A-062916 www.littelfuse.com/relayaccessories