SDP0120T023G5RP Littelfuse

SIDACtor Protection Thyristors Teccor brand SIDACtor DSL Protection Devices RoHS Pb e3 SDP Series - SOT23-5 Description This new SIDACtor series thyristors are targeted for the tertiary or line driver side protection position for VDSL2+, ADSL2 applications and general I/O protection functions. This new low capacitance over voltage protection does not require a bias voltage and is sufficiently robust for the chip- side position behind the coupling transformer. This SOT23-5 solution, with its flow-through design, minimizes PCB trace layout routing, while its four different stand-off voltage values offer compatibility with a variety of line drivers. Its low capacitance makes it compatible with ADSL2 and VDSL2, and the 30MHz bandplan of VDSL2+. Agency Approvals Features & Benefits Agency Agency File Number Lower overshooting Starts to switch in protection than clamping nanoseconds E133083 SO T23-5 surface mount RoHS compliant and package Halogen-Free Schematic Symbol Low insertion loss Pb-free E3 means 2nd level interconnect is Pb-free and Low capacitance the terminal finish material Bidirectional transient is tin(Sn) (IPC/JEDEC (Tip) (Tip) voltage protection J-STD-609A.01) Robust surge rating Applicable Global Standards NC YD/T 950 IEC 61 000-4-5 2nd edition YD/T 993 I TU K.20/21/45 Basic Level (Ring) (Ring) YD/T 1082 ITU K.20/21/45 Enhanced Level GR 1 089 Inter-building TIA-968-A GR 1089 Intra-building Additional Information TIA-968-B IEC 61000-4-2 Datasheet Resources Samples Electrical Characteristics V I =1.0 T T V I =5A V 250V/s I I Co f=1MHz,2V DRM DRM S H S Amps Part Number Marking V min V max mA typ mA max V max pF typ pF max SDP0080T023G5RP P8G 8 15 30 500 4.0 8.0 9.0 SDP0120T023G5RP P12G 12 20 30 500 4.0 7.8 9.0 SDP0180T023G5RP P18G 18 25 30 500 4.0 7.3 8.3 SDP0240T023G5RP P24G 24 35 30 500 4.0 5.7 6.5 Notes: - All measurement are made at an ambient temperature of 25C. - Ipp applies to -40C through +85C temperature range. - Ipp is repetitive surge rating and is guaranteed for the life of the product. - SIDACtor components are bidirectional. All electrical parameters and surge rating apply to forward and reverse polarities. 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/02/18 SIDACtor Protection Thyristors Teccor brand SIDACtor DSL Protection Devices Maximum Ratings Parameter Name Symbol Test Conditions Value Units SDP0080T023G5RP 50 1 SDP0120T023G5RP 70 8/20 min 2 1.2/50 SDP0180T023G5RP 70 Lightning surge waveforms I A pp SDP0240T023G5RP 70 1 5/310 min 20 2 10/700 min max Operating Free Temperature Range T -40 +85 C A Junction temperature T -40 +150 C J Storage temperature T -40 +150 C STG Notes: 1. Voltage waveform in s 2.Current waveform in s - The device also complies with IEC 61000-4-2 ESD 15kV (air discharge), 8 kV(contact discharge) and IEC 61000-4-4 EFT 40A(5/50nS) in equipment level ESD test when used behind the xDSL transformer. - The component must initially be in thermal equilibrium with -40C < T < +150C J - The lightning surge may be repeated after the device returns to its initial conditions. Mechanical dimensions, recommended layout dimensions Inches Millimeters The epoxy meets UL 94V-0 ratings. Dimension Min Max Min Max A 0.035 0.057 0.90 1.45 A A1 0 0.004 0 0.10 A2 0.035 0.051 0.90 1.30 B 0.014 0.020 0.35 0.50 0.037(0.95) C 0.004 0.008 0.09 0.20 D 0.11 0.118 2.80 3.00 D E 0.059 0.069 1.50 1.75 F 0.102 0.118 2.6 3.00 B G 0.004 0.024 0.10 0.60 E A2 A1 C G F 0.037(0.95) Dimension are in inches (and millimeters). 0.047(1.2) 0.024(0.60) 0.138(3.5) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/02/18