SE-TA6 Littelfuse

Accessories Terminations, adapters Termina Tions an D a Da PTers Termina Tions an D aDaPTers Product Features accessory For 1N5339B 5 W axial-lead ground-check termination. Included with SE-105 and SE-105 SE-107. SE-107 Termination Device SE-TA6-SM 50 W ground-check termination that is robust and compact for SE-105 submersible pumps. Wire lead simplifies installation. Stud-Mount Termination SE-107 (Replacement for 1N4553B) Assembly SE-TA6 50 W ground-check termination with convenient mounting holes and SE-105 screw terminals. SE-107 Termination Assembly SE-TA6A SE-105 Temperature compensated 50 W ground-check termination with (PGA-0T6A) SE-107 convenient mounting holes and screw terminals. SE-134C Termination Assembly SE-105 SE-TA6A-WL Temperature compensated 50 W ground-check termination with SE-107 convenient mounting holes and screw terminals. Termination Assembly SE-134C SE-TA6ASF-WL Temperature compensated 12 W ground-check termination, ideal SE-105 for use in cable-coupler end caps and submersible pumps. Mounting SE-107 Small-Format Termination holes and wire leads. SE-134C Assembly with Wire Leads SE-TA12A Temperature compensated 50 W ground-check termination with SE-135 convenient mounting holes and screw terminals. SE-145 Termination Assembly SE-TA12ASF-WL Temperature compensated 12 W ground-check termination, ideal SE-135 for use in cable-coupler end caps and submersible pumps. Mounting Small-Format Termination SE-145 holes and wire leads. Assembly with Wire Leads SE-TA12A-WL Temperature compensated 50 W ground-check termination with SE-135 convenient mounting holes and screw terminals. SE-145 Termination Assembly SE-TA12A Used together to allow an SE-134C to monitor a splitter box and two SE-TA12B SE-134C cables. Termination Assemblies Parallel ground-path rejection for ground-check monitors. Eliminates PPI-600V SE-105 SE-107 intermachine arcing and prevents stray DC currents from flowing in SE-134C SE-135 Parallel Path Isolator a monitored ground wire. Separate ground-fault and ground-check indication contacts for the RK-13 SE-105, and separate ground-fault and resistor-fault contacts for the SE-105 SE-107 SE-325. Used to provide output to a PLC and operate standard pilot SE-325 Relay Interface Module lights. Complete with conformally coated circuit boards. SE-485-DIN Industrial network quality RS-485 to RS-233 serial converter. MPS Industrial RS-485 to RS-232 DIN-rail mounted, 24 Vdc required. FPS Converter SE-485-PP Converts an RS-485 signal to an RS-232 signal. Used for set-point MPU-32 MPS programming and updating flash memory. 115.2 kbit/s maximum Port-Powered Serial FPU-32 FPS transfer rate. Converter CA-945 Connects an RJ45 to a 9-pin serial connector. Includes 1.5 m cable MPU-32 and plug-in adapter. FPU-32 Serial Connector Adapter Kit SE-330 CA-945 SE-ICUSB232 Connects a 9-pin serial cable to a USB port. SE-330AU SE-330HV USB to RS-232 Converter SE-485-PP SE-485-DIN www.littelfuse.com/relayscontrols May 2012 Littelfuse Protection Relays & Controls Accessories Terminations, adapters Termina Tions an D a Da PTers Termina Tions an D aDaPTers Product Features accessory For A0033 Extension cable for the A0200 and A0300 sensors. D0900 Detector Cable Optical network-interface and firmware-upgrade communication AC700-CUA EL731 adapter. Field-installed. Communications Adapter Junction box without indication, for parallel connection of more than D0400 D0900 2 sensors for one relay. Designed to connect up to 8 sensors. Junction Box (No Indication) Junction box with indication, for parallel connection of more than D0500 D0900 2 sensors for one relay. Designed to connect up to 8 sensors. Junction Box (Indication) E5540 USB Cable with A/Mini-B plug (2 m). E5000 USB Cable G0100 Connects to RS232 port. Includes blank front-plate labels and G2000 G3000 G3300 permanent pen for texting scales. Programming Kit K 3452 &K3450 For configuration from PC. M2000 RS232 Cable K1025 USB A to B cable. M2500 USB A-B Cable T4910 For external power factor setting. External contact between T4900 terminals 12 (COM) and 28 (PF ON). Included. Potentiometer with Cable www.littelfuse.com/relayscontrols May 2012 Littelfuse Protection Relays & Controls