V0603MHS12NR Littelfuse

Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MHS Series RoHS MHS Varistor Series Description The Multilayer HighSpeed MHS Series is a very-low capacitance extension to the Littelfuse ML family of transient voltage surge suppression devices available in an 0402 and 0603size surface mount chip. The MHS Series provides protection from ESD and EFT in highspeed data line and other high frequency applications. The low capacitance of the MHS Series permits usage in analog or digital circuits where it will not attenuate or distort the desired signal or data. Their small size is ideal for highdensity printed circuit boards, being typically applied to protect intergrated circuits and other sensitive components. They are particularly well Size Table suited to suppress ESD events including those specified in IEC 61000-4-2 or other standards used for Electromagnetic Metric EIA Compliance (EMC) testing. 1005 0402 1608 0603 The MHS Series is manufactured from semiconducting ceramics and is supplied in a leadless, surface mount Additional Information package. The MHS Series is also compatible with modern reflow and wave soldering prcesses. Littelfuse Inc. manufactures other multilayer varistor series products, see the ML, MLE, MLN and AUML Series data sheets. Datasheet Resources Samples Applications Features Data, Diagnostic Mobile Halogen-Free and EFT/B rated to IEC I/O Ports Communications RoHS compliant 61000-4-4 (Level 4) 3pF, 12pF, and 22pF Low leakage currents Universal Serial Computer/DSP capacitance versions Bus (USB) Products -40C to 125C suitable for highspeed operating temp. range Video & Audio Ports Industrial Instruments data rate lines Including Medical Inherently bi-directional Portable/Hand- ESD rated to IEC Held Products 61000-4-2 (Level 4) Absolute Maximum Ratings For ratings of individual members of a series, see device ratings and specifications table. Continuous MHS Series Units Steady State Applied Voltage: DC Voltage Range (V ) : V0402/0603MHS03 42 V M(DC) - V0402/0603MHS12 18 V - V0402/0603MHS22 09 V O Operating Ambient Temperature Range (T ) -40 to +125 C A O Storage Temperature Range (T ) -40 to +150 C STG 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: BO.11/18/20Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MHS Series Device Ratings and Specifications Performance Specifications (25 C) Typical Typical Inductance Maximum ESD Clamp Typical Leakage Current Maximum Capacitance at (from Impedance Voltage (Note 1) at Specified DC Voltage Clamping Part 1MHz (1V p-p) Analysis) Voltage At 1A Number 8kV Contact (Note 2) 15kV AIR (Note 3) 3.5V 5.5V C (Note 4) (8X20s) L Clamp Clamp P I MIN MAX L (V ) (V) (V) (A) (A) (pF) (pF) (nH) c (Note 5) 5 V0402MHS03N 135 <300 <400 0.5 1.00 2 <1.0 (Note 7) V0402MHS03F 135 <300 <400 0.5 1.00 2 5 <1.0 (Note 5) V0603MHS03N 135 <300 <400 0.5 1.00 1 6 <1.0 (Note 7) V0603MHS03F 135 <300 <400 0.5 1.00 1 6 <1.0 (Note 5) V0402MHS12N 55 <125 <160 0.5 1.00 8 16 <1.0 (Note 7) V0402MHS12F 55 <125 <160 0.5 1.00 8 16 <1.0 (Note 5) V0603MHS12N 55 <125 <160 0.5 1.00 8 16 <1.0 (Note 7) V0603MHS12F 55 <125 <160 0.5 1.00 8 16 <1.0 (Note 5) V0402MHS22N 30 <125 <160 0.5 1.00 15 29 <1.0 (Note 7) V0402MHS22F 30 <125 <160 0.5 1.00 15 29 <1.0 (Note 5) V0603MHS22N 30 <65 <100 0.5 1.00 15 29 <1.0 (Note 7) V0603MHS22F 30 <65 <100 0.5 1.00 15 29 <1.0 NOTES: 1. Tested to IEC-61000-4-2 Human Body Model (HBM) discharge test circuit. 2. Direct discharge to device terminals (IEC preferred test method). 3. Corona discharge through air (represents actual ESD event). 4. Capacitance may be customized, contact your Littelfuse Sales Representative. 5. V0402MHSxxx (0402 size devices) available as packaging option only. Example: V0402MHS03NR. See Packaging and Tape and Reel sections (last page) for additional information. 6. The typical capacitance rating is discrete component test result. 7. Items are lead free and antimony free, available as packing option only. Standby Current at Normalized Varistor Voltage and Peak Current and Energy Derating Curve Temperature For applications exceeding 125C ambient temperature, the peak surge current and energy ratings must be reduced as shown below. 1.2 100 1.0 80 0.8 O 25 60 0.6 O 85 40 0.4 O 125 20 0.2 0 0.0 -55 50 60 70 80 90 100110 120130 140150 0.0001 0.001 0.01 0.1 1 o AMBIENT TEMPERATURE ( C) CURRENT (mA) Figure 1 Figure 2 FIGURE 1. PEAK CURRENT AND ENERGY DERATING CURVE FIGURE 2. STANDBY CURRENT AT NORMALIZED VARISTOR VOLTAGE AND TEMPERATURE 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: BO.11/18/20 PERCENT OF RATED VALUE NORMALIZED VARISTOR VOLTAGE (V)