MicroStrain Sensing Product Datasheet G-Link-200 Ruggedized Wireless Triaxial Accelerometer Node HIGH PERFORMANCE SENSING On-board triaxial accelerometer with 2 to 40 g measurement range Extremely low noise on all axes 25 g/Hz or 80 g/Hz User-configurable low and high pass filters On-board temperature sensor Standard Amusement Ride Characterization Test version available. RUGGED AND WEATHERPROOF The G-Link-200 has an onboard triaxial accelerometer IP-67 weatherproof enclosure allowing high-resolution data acquisition with extremely -40 to +85C operating temperature low noise and drift. Derived vibration parameters allow for Stainless steel base long-term monitoring of key performance indicators while maximizing battery life. Bolt or magnetic mount LORD Sensing Wireless Sensor Networks enable RELIABLE DATA COLLECTION simultaneous, high-speed sensing and data aggregation from Lossless, synchronized, and scalable networks using scalable sensor networks. Our wireless sensing systems are LXRS or LXRS+ protocol ideal for test and measurement, remote monitoring, system Remotely configure nodes and view sensor data with performance analysis, and embedded applications. SensorConnect (PC), SensorCloud (web), or MSCL (API Users can easily program nodes for continuous, periodic burst, library) or event-triggered sampling with the SensorConnect software. The optional web-based SensorCloud interface optimizes data CONFIGURE FOR MANY APPLICATIONS aggregation, analysis, presentation, and alerts for sensor data Output raw acceleration waveform data, tilt, or derived from remote networks. vibration parameters (Velocity, Amplitude, Crest Factor) Up to 4096 Hz sampling Continuous, periodic, or event-triggered operation Transmit data real-time and/or save to onboard memory APPLICATIONS Vibration monitoring Condition based maintenance (CBM) Impact and event monitoring Health monitoring of rotating components, aircraft, structures, and vehicles Standardized Amusement Ride Characterization Test (SARC Test): Model G-Link,-200-R ASTM F2137-18 Compliant model: G-Link-200-R 2020 Parker Hannifin MicroStrain Sensing. Document 8400-0102 Revision H. Subject to change without notice.Ruggedized Wireless Triaxial Accelerometer Node Specifications Analog Input Channels Operating Parameters 8 g 40 g Wireless communication Outdoor/line-of-sight: 2 km (ideal)*, 800 m (typical)** Measurement range range Indoor/obstructions: 50 m (typical)** 2 g, 4 g, or 8 g 10 g, 20 g, or 40 g configurable configurable Radio frequency (RF) License-free 2.405 to 2.480 GHz with 16 channels transceiver carrier Noise density 25 g/ Hz 80 g/ Hz Adjustable from 0 dBm to 20 dBm. Power output RF transmit power 0 g offset 25 mg (2 g) 50 mg (10 g) restricted regionally to operate within legal limits .1 mg/C (typical), 0.5 mg/C (typical), 3 x 3.6 V, AA batteries 0 g offset vs temperature Power source .15 mg/C (maximum) 0.75 mg/C (maximum) (Saft LS 14250 recommended) Integrated Sensors Triaxial MEMS accelerometer, 3 channels Battery input range 0.8 V to 5.5 V Accelerometer bandwidth DC to 1 kHz Battery lifetime