MicroStrain Sensing Product Datasheet SG-Link -200-OEM Wireless 2 Channel Analog Input Node PRODUCT HIGHLIGHTS 1 differential and 1 single-ended input channel Differential channel compatible with 120, 350, and 1k Ohm Wheatstone bridge sensing circuits On-board temperature sensor Digital input channel for RPM and pulse counting Supply power from 3.3 to 30 V Continuous, periodic burst, and event-triggered sampling Output raw data and/or derived channels such as mean, RMS and peak-peak LORD Sensing Wireless Sensor Networks enable LXRS protocol allows lossless data collection, scalable simultaneous, high-speed sensing and data aggregation from networks and node synchronization of 50 s scalable sensor networks. Our wireless sensing systems are Remote strain calibration using on-board shunt resistor ideal for test and measurement, remote monitoring, system performance analysis, and embedded applications. FEATURES AND BENEFITS The SG-Link-200-OEM allows for remote data collection from HIGH PERFORMANCE a range of sensor types, including strain gauges, pressure Up to 1024 Hz sampling transducers, and accelerometers. The node supports high Low noise 1.5 or 2.5 V sensor excitation resolution, low noise data collection from 1 differential and 1 single-ended input channels at sample rates up to 1 kHz. A Noise as low as 1 V p-p digital input features compatibility with a hall effect sensor for High resolution 24-bit data reporting RPM and total pulses, ideal for many torque sensing applications. Datalog up to 8 million data points Low power operation, well-suited for battery powered Users can easily program nodes for continuous, periodic burst, applications. or event-triggered sampling with the SensorConnect software. The optional web-based SensorCloud interface optimizes data Wireless range up to 1 km (400 m typical) aggregation, analysis, presentation, and alerts for sensor data -40 to +105C operating temperature range from remote networks. APPLICATIONS Strain, load, force, pressure, acceleration, vibration,displacement, or torque sensing. Condition-based monitoring (CBM) Structural load and stress monitoring Test and measurement RPM and Pulse counting 2020 Parker Hannifin MicroStrain Sensing. Document 8400-0124 Revision D. Subject to change without notice.Wireless 2 Channel Analog Input Node Specifications Mechanical Shock Analog Input Channels 1000g/1.5ms Limit Sensor input 1 differential, 1 single-ended and ESD 4 kV channels 1 RPM/pulse input Sensor excitation Physical Specifications Configurable 1.5 or 2.5 V (100 mA) output* Dimensions 41.3 mm x 29.0 mm x 5.9 mm Measurement range 0 to Excitation voltage (1.5 or 2.5 V) Interface Solder or screw-down terminal available Adjustable gain 1 to 128 Weight 7 grams ADC resolution 24 bit Integration Noise (Gain = 128) 1 Vp-p to 20 Vp-p (filter selection dependent) Compatible gateways All WSDA gateways Noise (Gain = 1) 15 to 250 Vp-p (filter selection dependent) SensorCloud, SensorConnect, Windows 7, 8 & 10 Temperature stability Software 0.172 V/ C (typical) compatible (-40 to +105C) Software Configurable SINC4 low pass filter for reducing