LioN-Power Multi-protocol 16 Digital Inputs, M12 L-coded or 7/8 Power Supply Connection, PROFINET, EtherNet/IP or EtherCAT Product Description Type 0980 ESL 391-121 0980 ESL 391-111 NEW NEW Description LioN-P Multi-protocol module, PROFINET, EtherNet/IP or EtherCAT LioN-P Multi-protocol module, PROFINET, EtherNet/IP or EtherCAT device, 16 digital input channels, M12 LAN connection, 4-poles, device, 16 digital input channels, M12 LAN connection, 4-poles, D-coded, M12 L-coded power supply, 5-poles D-coded, 7/8 power supply, 5-poles Order No. 934879001 934882001 Technical Data Protection Degree IP65, IP67, IP69K (only if mounted and locked in combination IP65, IP67 (only if mounted and locked in combination with Hirschmann/Lumberg connector) with Hirschmann/Lumberg connector) Ambient Temperature (Operation) -20 C to +70 C Dimensions (W x H x D) 59.6 x 30.7 x 200 (mm) 59.6 x 26.2 x 206 (mm) Weight 500 g 520 g Housing Material Metal, Zinc Die-cast Bus System Protocol PROFINET /EtherNet/IP/EtherCAT I/O Device Connection M12 LAN connection, 4-poles, D-coded Transmission Rate Fast Ethernet (10/100 Mbit/s), Full Duplex Rotary Address Switches Yes, 3x Power Supply Nominal Voltage 24 V DC (SELV/PELV) Nominal Voltage Range 18 to 30 V DC Connection M12, L-coded, 5-poles 7/8, 5-poles Current Carrying Capacity of Connector 16 A 9 A Current Consumption (typ.) 160 mA (+/-20% at 24 V DC) Input Channels Number of Channels 16 Connection M12, 5-poles, A-coded Channel Type Type 3 acc. to IEC 61131-2 Nominal Voltage 24 V DC via US (system power supply) Sensor Current Supply 200 mA per Port Sensor Type PNP Continued Next Page Bit Assignment Bit 7 6 5 4 3 2 1 0 M12 Input 16DI Byte 0 4B 4A 3B 3A 2B 2A 1B 1A Byte 1 8B 8A 7B 7A 6B 6A 5B 5A Data Sheet: 0980 ESL 391-121 111 www.lumberg-automationusa.com 1.800.Belden1 www.lumberg-automationusa.comLioN-Power Multi-protocol 16 Digital Inputs, M12 L-coded or 7/8 Power Supply Connection, PROFINET, EtherNet/IP or EtherCAT Diagnostic Indication 0980 ESL 391-121 and 0980 ESL 391-111 LED Indicator Condition 1...8 A Yellow Channel status 1...8 DIA A Red Periphery error 1...8 B White Channel status 1...8 DIA B Red Periphery error P1 Lnk/Act Green Connection to an Ethernet device Green blinking I/O device exchanging data Off No connection to another device P2 Lnk/Act Green Connection to an Ethernet device Yellow blinking I/O device exchanging data Off No connection to another device PROFINET BF Red Bus error, no data exchange with I/O controller Off No error message DIA Red Common indicator for periphery errors Red blinking Firmware update Off No error message EtherNet/IP MS (Module status) Green Device is ready for operating Green blinking Wrong configuration Red/green blinking Self test is running Red blinking Firmware update Off IP address is available NS (Network status) Green blinking IP address is available Green Connection to master is available Red blinking At least one connection has timed out Red IP address is already being used by another device Red/green blinking Self test is running Off Device is switched off/device has no IP address EtherCAT RUN Green Device is in state OPERATIONAL Green blinking Device is in state PRE-OPERATIONAL Green single flash Device is in state SAFE-OPERATIONAL Green flickerng Device is in state BOOTSTRAP Off Device is in state INIT ERR RedAn critical communication or application controller error has occurred Red double flash An application watchdog timeout has occurred. Red single flashSlave device application has changed the EtherCAT state autonomously, due to local erro Red blinking General Configuration Error Red flickering Booting Error was detected Off No error US Green Voltage 19 V <= US <= 30 V Red US Voltage < 19 V or US > 30 V Pin Assignment M12 I/O Port, M12 Power Supply, M12 LAN Connection, Power Supply 7/8 A-coded L-coded D-coded 1 = +24 V 1 = +24 V 1 = GND UL 1 = TD+ 2 = IN B 2 = GND UL 2 = GND (0 V) 2 = RD+ 3 = GND (0 V) 3 = GND (0 V) 3 = FE 3 = TD- 4 = IN A 4 = +24 V UL 4 = +24 V 4 = RD- 5 = FE 5 = FE 5 = +24 V UL Continued Next Page www.lumberg-automationusa.com Data Sheet: 0980 ESL 391-121 111 1.800.Belden1 www.lumberg-automationusa.com