The LUMEL PA39 CC0M500000 with Power meter is an active power meter with analogue output for panel mounting that measures from 0 up to 250kW. The installation is fairly straightforward and requires the connection of three cables: mains connections, load connections and one of the two analogue outputs, 4-20 mA or 0-10 VDC. It can be used in complex three-phase systems with 4-wire or 3-wire zero-sequence meters, as well as in more simple single-phase systems. The housing is made of aluminium alloy which makes it resistant to harsh environmental conditions and it is also corrosion proof. It features an automatic temperature measuring and compensated feature, allowing to minimize errors due to the environment temperature changes. The power output can be measured directly or indicated in terms of power factor or harmonics related. The device is equipped with LED indicators which indicate working status, overloads and phase sequence when three-phase systems are used. Lastly, it has a built-in conformal coating which significantly increases the lifetime of the electronic part, protecting it from thermal shocks, humidity, chemical agents and electrical discharges.